Results 1 - 60 of 81
40 640 Ft
(32 000 Ft excl VAT)
ATB101

Pivoting Mount
ATB101, Hot Shoe Adaptor
3/8″ thread

40 640 Ft
(32 000 Ft excl VAT)
406 146 Ft
(319 800 Ft excl VAT)
ATE308Set

The Ambient Emesser (ATE 308) is a very compact true condenser “figure-of-eight” microphone intended to convert any boom mic on the fly into a M/S stereo system. It allows you to add a bit of stage to the dialogue but also capture textured room tones or even ambience sounds in pristine stereo without the need to change your setup whatever mic is in use.

406 146 Ft
(319 800 Ft excl VAT)
2 032 Ft
(1 600 Ft excl VAT)
ATH 101-G

2 pcs. O-rings, two silicone rubber suspension rings

2 032 Ft
(1 600 Ft excl VAT)
57 023 Ft
(44 900 Ft excl VAT)
ATH101

ATH101, Hot-shoe Shockmount Suspension

57 023 Ft
(44 900 Ft excl VAT)
51 054 Ft
(40 200 Ft excl VAT)
ATHAM

TinyMike custom suspension for ARRI AMIRA with Rycote lyres

51 054 Ft
(40 200 Ft excl VAT)
51 054 Ft
(40 200 Ft excl VAT)
ATHRY

ATHRY, TinyMike Soft Suspension
Meeting the requirements of most common camera types, the TinyMike Sets (ATM216 DSLR & ATM216 PH) now includes a highly effective Rycote shockmount.
Thanks to their Lyre Technology® handling noise are insolated from the sensitive microphone to mount the InVision® to a hot/ cold shoe we invented our sophisticated mount (QBS).

51 054 Ft
(40 200 Ft excl VAT)
9 398 Ft
(7 400 Ft excl VAT)
ATM2.5

Adaptor cable with 2.5 mm TRRS right angle plug
Binder plug to TRRS plug, padded

9 398 Ft
(7 400 Ft excl VAT)
9 398 Ft
(7 400 Ft excl VAT)
ATM3.5

TinyMike adaptor with 3.5 TRRS right angle plug
Binder plug to TRRS plug, padded

9 398 Ft
(7 400 Ft excl VAT)
9 398 Ft
(7 400 Ft excl VAT)
ATM3.5H

TinyMike adaptor with 3.5 TRRS right angle plug
Binder plug to TRRS plug, unpadded

9 398 Ft
(7 400 Ft excl VAT)
18 288 Ft
(14 400 Ft excl VAT)
ATMB

„Tiny Bar“ double cold shoe 3/8” and 1/4” mount

18 288 Ft
(14 400 Ft excl VAT)
36 703 Ft
(28 900 Ft excl VAT)
ATMEMP

TinyMike Adaptor with 3-pin XLR plug
Active cable for 48 Volt Phantom power

36 703 Ft
(28 900 Ft excl VAT)
51 054 Ft
(40 200 Ft excl VAT)
ATMEMP3.5

TinyMike adaptor for 48 Volt Phantom power

51 054 Ft
(40 200 Ft excl VAT)
36 703 Ft
(28 900 Ft excl VAT)
ATMEMPAM

TinyMike adaptor with 3-pin XLR plug
Active cable for 48 Volt Phantom power

36 703 Ft
(28 900 Ft excl VAT)
39 624 Ft
(31 200 Ft excl VAT)
ATMP

Hot shoe accessory mount with additional hot shoe for radio transmitter

39 624 Ft
(31 200 Ft excl VAT)
39 624 Ft
(31 200 Ft excl VAT)
ATMWJ

Fluffy wind shield from Ambient

39 624 Ft
(31 200 Ft excl VAT)
9 398 Ft
(7 400 Ft excl VAT)
ATMWS

TinyMike wind shield, flocked

9 398 Ft
(7 400 Ft excl VAT)
16 650 Ft
(13 110 Ft excl VAT)
InVision Table Stand

The InVision Table Stand allows a microphone or recorder to be mounted on a flat surface, leaving both hands of the recordist free, and may be used in broadcast studios or for location recording where a desk or other flat surface is available.

16 650 Ft
(13 110 Ft excl VAT)
11 170 Ft
(8 795 Ft excl VAT)
Joe's Sticky Stuff 1/2" Double-Sided Adhesive Tape - Clear

The Joe's Sticky Stuff 1/2" Clear Double-Sided Adhesive Tape is made of an aggressive, pressure-sensitive adhesive. Each roll measures at 1/2" wide by 20' long. In the past, people have used foam tape, blue tack and an automotive window ribbon called butyl. Invented and perfected behind-the-scenes in Hollywood, it was originally used to secure props in place without leaving behind any sticky residue and without damaging the item or the surface to which it was affixed. Filmtools stocks a variety of many different adhesive tapes.

11 170 Ft
(8 795 Ft excl VAT)
16 510 Ft
(13 000 Ft excl VAT)
KBKBAG - Boom Pole Kit Bag

The Boompole Kit Bag from K-Tek is a 40"L x 10"Dia duffel style bag for transporting boom poles. The bag features an adjustable grab handle.

16 510 Ft
(13 000 Ft excl VAT)
76 365 Ft
(60 130 Ft excl VAT)
KBLT35B - Stingray Boom Pole Case - Medium

The small KBLT35B Boom Pole Case from K-Tek is a three-sided case consisting of a semi-hard clamshell design with zippers and a removable inner pouch. It is the perfect solution for carrying and storing your boom pole and other accessories. Holds any pole with a minimum collapsed length of 35 inches and less.

76 365 Ft
(60 130 Ft excl VAT)
101 130 Ft
(79 630 Ft excl VAT)
KBLT52B - Stingray Boom Pole Case - Large

Holds any pole with a minimum collapsed length of 52 inches and less. Semi-hard clam-shell style with zippers and removable inside pouch.

101 130 Ft
(79 630 Ft excl VAT)
93 218 Ft
(73 400 Ft excl VAT)
KE110 Avalon Series Aluminum Boompole - Uncabled

The KE110 Avalon Aluminum Boom Pole has a collapsed length of 2’7″ / 79cm and an extended length of 9’2″ / 279cm and only weighs 1.458lbs / 661g. This 5-section Aluminum Boompole is uncabled. The top attachment is a 3/8″ – 16 male thread and the bottom attachment is a Delrin Base.

93 218 Ft
(73 400 Ft excl VAT)
112 268 Ft
(88 400 Ft excl VAT)
KE110CC Avalon Series Aluminum Boompole with Internal XLR Cable

The KE110CC Avalon Aluminum Boom Pole has a collapsed length of 2’7″ / 79cm and an extended length of 9’2″ / 279cm and only weighs 1.723lbs / 781g. This 5-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″ – 16 male thread and the bottom attachment is a Male 3-pin XLR – Straight Exit.

112 268 Ft
(88 400 Ft excl VAT)
120 904 Ft
(95 200 Ft excl VAT)
KE110CCR Avalon Series Aluminum Boompole with Internal XLR Cable

The KE110CCR Avalon Aluminum Boom Pole has a collapsed length of 2’7″ / 79cm and an extended length of 9’2″ / 279cm and only weighs 1.813lbs / 822g. This 5-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″ – 16 male thread and the bottom attachment is a Male 3-pin XLR Side Exit with Delrin Base.

120 904 Ft
(95 200 Ft excl VAT)
103 632 Ft
(81 600 Ft excl VAT)
KE144 Avalon Series Aluminum Boompole - Uncabled

The KE144 Avalon Aluminum Boom Pole has a collapsed length of 3’3″ / 99cm and an extended length of 12’0″ / 366cm and only weighs 1.900lbs / 862g. This 5-section Aluminum Boompole is uncabled. The top attachment is a 3/8″ – 16 male thread and the bottom attachment is a Delrin Base.

103 632 Ft
(81 600 Ft excl VAT)
120 904 Ft
(95 200 Ft excl VAT)
KE144CC

The KE144CC Avalon Aluminum Boom Pole has a collapsed length of 3’3″ / 99cm and an extended length of 12’0″ / 366cm and only weighs 1.900lbs / 862g. This 5-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″ – 16 male thread and the bottom attachment is a Male 3-pin XLR – Straight Exit.

120 904 Ft
(95 200 Ft excl VAT)
131 699 Ft
(103 700 Ft excl VAT)
KE144CCR Avalon Series Aluminum Boompole

The KE144CCR Avalon Aluminum Boom Pole has a collapsed length of 3’3″ / 99cm and an extended length of 12’0″ / 366cm and only weighs 2.24lbs / 1016g. This 5-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″ – 16 male thread and the bottom attachment is a Male 3-pin XLR Side Exit with Delrin Base.

131 699 Ft
(103 700 Ft excl VAT)
58 293 Ft
(45 900 Ft excl VAT)
KE69 Avalon Series Aluminum Boompole - Uncabled

The K-Tek KE-69 Avalon Series Aluminum Boompole provides a moderately priced, lightweight boompole solution for ENG, EFP, and other field recording applications. A total of three aluminum sections telescope between 2' 4" to 5' 9", and will easily store in any standard equipment case.

58 293 Ft
(45 900 Ft excl VAT)
71 247 Ft
(56 100 Ft excl VAT)
KE69CC Avalon Series Aluminum Boompole with Internal XLR Cable

The K-Tek KE-69CC Avalon Series Aluminum Boompole provides a moderately priced, lightweight boompole solution for ENG, EFP, and other field recording applications. This pole features an internal coiled cable and an XLR connection at the base of the pole.

71 247 Ft
(56 100 Ft excl VAT)
92 837 Ft
(73 100 Ft excl VAT)
KE79 Avalon Series Aluminum Boompole - Uncabled

The K-Tek KE-79 Avalon Series Aluminum Boompole provides a moderately priced, lightweight boompole solution for ENG, EFP, and other field recording applications. A total of six aluminum sections telescope between 1' 10" to 6' 7", and will easily store in any standard equipment case.

92 837 Ft
(73 100 Ft excl VAT)
110 109 Ft
(86 700 Ft excl VAT)
KE79CC Avalon Series Aluminum Traveler Boompole with Internal XLR Cable

The KE79CC Avalon Aluminum Traveler Boom Pole has a collapsed length of 1’8″ | 51cm and an extended length of 6’7″ | 201cm and only weighs 1.452lbs | 659g. This 6-section Aluminum Traveler Boompole features an Internal Coiled Cable. The top attachment is a 3/8″ – 16 male thread and the bottom attachment is a Male 3-pin XLR – Straight Exit.

110 109 Ft
(86 700 Ft excl VAT)
120 904 Ft
(95 200 Ft excl VAT)
KE79CCR Aluminum Traveler Boompole with Internal Coiled XLR Cable (Right Angled)

The KE79CCR Avalon Aluminum Traveler Boom Pole has a collapsed length of 1’8″ | 51cm and an extended length of 6’7″ | 201cm and only weighs 1.45lbs | 658g. This 6-section Aluminum Traveler Boompole features an Internal Coiled Cable. The top attachment is a 3/8″ – 16 male thread and the bottom attachment is a Male 3-pin XLR Side Exit with Delrin Base.

120 904 Ft
(95 200 Ft excl VAT)
73 406 Ft
(57 800 Ft excl VAT)
KE89 Avalon Series Aluminum Boompole - Uncabled

The KE89 Avalon Aluminum Boom Pole has a collapsed length of 2’5″ | 74cm and an extended length of 7’6″ | 218cm and only weighs 1.110lbs | 503g. This 4-section Aluminum Boompole is uncabled. The top attachment is a 3/8″ – 16 male thread and the bottom attachment is a Delrin Base.

73 406 Ft
(57 800 Ft excl VAT)
84 201 Ft
(66 300 Ft excl VAT)
KE89CC Avalon Series Aluminum Boompole with Internal XLR Cable

The KE89CC Avalon Aluminum Boom Pole has a collapsed length of 2’5″ | 74cm and an extended length of 7’6 | 218cm and only weighs 1.375lbs | 624g. This 4-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″ – 16 male thread and the bottom attachment is a Male 3-pin XLR – Straight Exit.

84 201 Ft
(66 300 Ft excl VAT)
12 954 Ft
(10 200 Ft excl VAT)
KSBCH1 – Stingray Boom Cup Holder

Stingray Boom Cup Holder

12 954 Ft
(10 200 Ft excl VAT)
14 453 Ft
(11 380 Ft excl VAT)
KSBS35 - Stingray Boom Sleeve, 35”

The 35” K-Tek Stingray Boom Sleeve is a protective bag designed to safely house a collapsed boompole for boom operators and field recordists moving between production locations. It will hold a boompole up to 35” in collapsed length.

14 453 Ft
(11 380 Ft excl VAT)
18 580 Ft
(14 630 Ft excl VAT)
KSBS52 - Stingray Boom Sleeve, 52”

The 52” K-Tek Stingray Boom Sleeve is a protective bag designed to safely house a collapsed boompole for boom operators and field recordists moving between production locations. It will hold a boompole up to 52” in collapsed length.

18 580 Ft
(14 630 Ft excl VAT)
14 859 Ft
(11 700 Ft excl VAT)
MK0.3

Micr. cable (PER2x 0.25S), XLR-3F to XLR-3M, length 0.3 m

14 859 Ft
(11 700 Ft excl VAT)
24 765 Ft
(19 500 Ft excl VAT)
MK0.3-X3F-X5M

Micr. cable (PER2x 0.14), XLR-3F to XLR-5M, length 0.3 m
to connect mono shotgun microphone to cameras with XLR-5-pin input on front (e.g. PDW 700)

24 765 Ft
(19 500 Ft excl VAT)
14 859 Ft
(11 700 Ft excl VAT)
MK0.5

Micr. cable (PER2x 0.25S), XLR-3F to XLR-3M, length 0.5 m

14 859 Ft
(11 700 Ft excl VAT)
15 875 Ft
(12 500 Ft excl VAT)
MK0.5-90

Micr. cable, XLR-3F/90° to XLR-3M, 0.5 m

15 875 Ft
(12 500 Ft excl VAT)
31 242 Ft
(24 600 Ft excl VAT)
MK0.5-90K

Micr. cable (PER2x 0.25S), XLR-3F/90°-short to XLR-3M, 0.5 m

31 242 Ft
(24 600 Ft excl VAT)
14 859 Ft
(11 700 Ft excl VAT)
MK1

Micr. cable (PER2x 0.25S), XLR-3F to XLR-3M, length 1.0 m

14 859 Ft
(11 700 Ft excl VAT)
15 875 Ft
(12 500 Ft excl VAT)
MK1-90

Micr. cable (PER2x 0.25S), XLR-3F/90° to XLR-3M, length 1.0

15 875 Ft
(12 500 Ft excl VAT)
26 289 Ft
(20 700 Ft excl VAT)
MK10

Micr. cable (PER2x 0.25S), XLR-3F to XLR-3M, length 10 m

26 289 Ft
(20 700 Ft excl VAT)
28 194 Ft
(22 200 Ft excl VAT)
MK12

Micr. cable (PER2x 0.5), XLR-3F to XLR-3M, length 12 m

28 194 Ft
(22 200 Ft excl VAT)
37 592 Ft
(29 600 Ft excl VAT)
MK12-90

Micr. cable (PER2x 0.5), XLR-3F/90° to XLR-3M, length 12 m

37 592 Ft
(29 600 Ft excl VAT)
33 655 Ft
(26 500 Ft excl VAT)
MK15

Micr. cable (PER2x 0.5), XLR-3F to XLR-3M, length 15 m

33 655 Ft
(26 500 Ft excl VAT)
16 891 Ft
(13 300 Ft excl VAT)
MK2

Micr. cable (PER2x 0.25S), XLR-3F to XLR-3M, length 2.0 m

16 891 Ft
(13 300 Ft excl VAT)
37 592 Ft
(29 600 Ft excl VAT)
MK20

Micr. cable (PER2x 0.5), XLR-3F to XLR-3M, length 20 m

37 592 Ft
(29 600 Ft excl VAT)
44 069 Ft
(34 700 Ft excl VAT)
MK25

Micr. cable (PER2x 0.5), XLR-3F to XLR-3M, length 25 m

44 069 Ft
(34 700 Ft excl VAT)
16 891 Ft
(13 300 Ft excl VAT)
MK3

Micr. cable (PER2x 0.25S), XLR-3F to XLR-3M, length 3.0 m

16 891 Ft
(13 300 Ft excl VAT)
46 101 Ft
(36 300 Ft excl VAT)
MK30

Micr. cable (PER2x 0.5), XLR-3F to XLR-3M, length 30 m

46 101 Ft
(36 300 Ft excl VAT)
17 780 Ft
(14 000 Ft excl VAT)
MK4

Micr. cable (PER2x 0.25S), XLR-3F to XLR-3M, length 4.0 m

17 780 Ft
(14 000 Ft excl VAT)
19 812 Ft
(15 600 Ft excl VAT)
MK5

Micr. cable (PER2x 0.25S), XLR-3F to XLR-3M, length 5.0 m

19 812 Ft
(15 600 Ft excl VAT)
22 352 Ft
(17 600 Ft excl VAT)
MK7

Micr. cable (PER2x 0.25S), XLR-3F to XLR-3M, length 7.0 m

22 352 Ft
(17 600 Ft excl VAT)
23 241 Ft
(18 300 Ft excl VAT)
MK8

Micr. cable (PER2x 0.25S), XLR-3F to XLR-3M, length 8.0 m

23 241 Ft
(18 300 Ft excl VAT)
24 257 Ft
(19 100 Ft excl VAT)
MK9

Micr. cable (PER2x 0.25S), XLR-3F to XLR-3M, length 9.0 m

24 257 Ft
(19 100 Ft excl VAT)
18 771 Ft
(14 780 Ft excl VAT)
PCS-Lite 3/8"

PCS-Lite 3/8"
When you need to quickly mount or swap out multiple microphones and accessories during your events, a reliable and economic quick-release system will likely be at the top of your list, Rycote has the solution with the PCS-Lite!

18 771 Ft
(14 780 Ft excl VAT)
18 771 Ft
(14 780 Ft excl VAT)
PCS-Lite 5/8"

PCS-Lite 58'
Product Code: RYC185812
The Professional Connection System (‘PCS’) is the ingenious new quick attachment/quick release connection system from Rycote.
Designed with the music industry in mind, the PCS-Lite is made from durable, non-reflective high-quality materials in neutral colours and comes with 5/8” threaded fittings, allowing for quick and easy microphone changes whilst maintaining a secure connection to your microphone stand.

18 771 Ft
(14 780 Ft excl VAT)
Results 1 - 60 of 81