nla_menu_1213307549

Szűrők

minden cikk, vagy csak az alapvető termékek

Találatok: 1 - 60 / 251
Hívjon az árért
A10-RX-SL - Two-channel, dual-diversity receiver, D-sub connector and plate for Uni-/Superslot mount

A kétcsatornás A10-RX vevő egy haladó digitális eszköz, amely egy vagy két A10-TX adóval működik. Az Advanced Digital Diversity System segítségével az A10-RX vevő a legjobb jelet választja ki az egyes csatornák két vevője között.

Hívjon az árért
Hívjon az árért
A10-RX-XLR - Two-channel, dual-diversity receiver with XLR and power cables

A kétcsatornás A10-RX vevő egy haladó digitális eszköz, amely egy vagy két A10-TX adóval működik. Az Advanced Digital Diversity System segítségével az A10-RX vevő a legjobb jelet választja ki az egyes csatornák két vevője között.

Hívjon az árért
Hívjon az árért
A10-TX-A - Digital body-pack transmitter (470-548MHz)

Compact Digital Transmitter with Built-in Timecode-Enabled Recorder. The core of the A10-TX transmitter is its low-noise, high-dynamic-range analog input. It accepting signals from low-level lavalier microphones to balanced line-level. The 3-pin LEMO input offers analogue limiters, 5 volt bias for lavalier microphones, as well as 12 and 48 volt phantom power for balanced microphones.

Hívjon az árért
Hívjon az árért
A10-TX-B - Digital body-pack transmitter (518-608MHz)

Compact Digital Transmitter with Built-in Timecode-Enabled Recorder. The core of the A10-TX transmitter is its low-noise, high-dynamic-range analog input. It accepting signals from low-level lavalier microphones to balanced line-level. The 3-pin LEMO input offers analogue limiters, 5 volt bias for lavalier microphones, as well as 12 and 48 volt phantom power for balanced microphones.

Hívjon az árért
Hívjon az árért
A10-TX-D - Digital body-pack transmitter (534-630MHz)

Compact Digital Transmitter with Built-in Timecode-Enabled Recorder. The core of the A10-TX transmitter is its low-noise, high-dynamic-range analog input. It accepting signals from low-level lavalier microphones to balanced line-level. The 3-pin LEMO input offers analogue limiters, 5 volt bias for lavalier microphones, as well as 12 and 48 volt phantom power for balanced microphones.

Hívjon az árért
Hívjon az árért
ACCSI-GPS

The ACCSI-GPS Serial Interface with GPS Module from Ambient Recording is a universal serial interface which plugs into the 15-pin Sub-D socket of the ACC501 and serves as an interface for the GPS module.

Hívjon az árért
Hívjon az árért
ACL 204

The ACL204 from Ambient Recording is a portable synchronizer and the first in a new generation of Clockit products which fully utilizes the Ambient Clockit Network System (ACN).

Hívjon az árért
Hívjon az árért
ACL-T204

The Pouch for Ambient Lockit from Ambient Recording is a leather pouch included within the purchased parts package.

Hívjon az árért
Hívjon az árért
ACN-LD

The Lockit Timecode LED Display from Ambient Recording is the electronic display section of the Lockit Slate and also serves as a fully functional, compact, standalone display for documentary or desktop use.

Hívjon az árért
Hívjon az árért
ACN-LS csapó

Az ACN-LS csapó az Ambient Recording-tól egy moduláris time code csapó és kijelző. Önmagában egy sziklaszilárd, nagyon pontos és hőmérséklet-ellenálló time code generátor.

Hívjon az árért
569 595 Ft
(448 500 Ft nettó)
ACN-LSW csapó

The maple wood, ACN-LSW Lockit, Modular Timecode Slate and Display by Ambient Recording provides a rock solid, accurate, temperature compensated timecode generator. It features double the brightness with the use of four AA batteries.

569 595 Ft
(448 500 Ft nettó)
Hívjon az árért
ACN-ML

The Master Lockit ACN-ML Timecode Hub Transceiver from Ambient Recording is a timecode master, wireless video proxy server, and "On the Set" metadata synchronization hub.

Hívjon az árért
Hívjon az árért
ACN-TL

The ACN-TL Tiny Lockit Timecode Generator & Transceiver from Ambient Recording is a temperature compensating timecode generator. Ambient Clockit Network support enables full generator-buffered timecode transceiver functionality.

Hívjon az árért
Hívjon az árért
ACN-TL-T

The ACN-TL-T Pouch for Ambient Tiny Lockit by Ambient Recording is a leather pouch with a transparent foil window. It features cut outs for connectors and on/off switches.

Hívjon az árért
Hívjon az árért
AK-L0B2-HS4

Adapter cbl. Alexa 12 V to Hirose 4-pin

Hívjon az árért
Hívjon az árért
AMS-AB

The Ambient Power Slot is an accessory to the ARRI AMIRA camera and replaces the standard battery mounting plate with quick and easy mounting due to spring loaded contact array and tapered mounting studs.

Hívjon az árért
Hívjon az árért
AMS-V

The Ambient Power Slot is an accessory to the ARRI AMIRA camera and replaces the standard battery mounting plate with quick and easy mounting due to spring loaded contact array and tapered mounting studs.

Hívjon az árért
Hívjon az árért
AMUNI

Slot for Uni-slot receivers, TA5 connector, Hirose-4P powering

Hívjon az árért
Hívjon az árért
ATE208

The ATE 208 Emesser from Ambient Recording is a compact condenser microphone that converts any standard boom mic into an M/S stereo mic system.

Hívjon az árért
Hívjon az árért
ATE208Set

The ATE 208 Emesser from Ambient Recording is a compact condenser microphone that converts any standard boom mic into an M/S stereo mic system.

Hívjon az árért
Hívjon az árért
BNC-TA3F

The Ambient Recording 90° BNC Male to TA3F Timecode-Input Cable is used to feed time code into the SD 552 Sound Devices 552 Field Mixer.

Hívjon az árért
160 782 Ft
(126 600 Ft nettó)
CL-1

ONLY ONE UNIT LEFT ON STOCK - Interface for connecting external keyboards to Sound Devices 7-Series audio recorders. Also includes programmable toggle switch for remote roll functions, status LED’s, and hard wire contact closures for custom wiring. Connects via C. Link port on the recorders.

160 782 Ft
(126 600 Ft nettó)
Hívjon az árért
CL-12

Linear fader controller for the 688, 664 and 633. Powered by 6-Series USB connection for 688. 633 and 664 require external 5v power via rear USB port.*Not all features available on 664 & 633.

Hívjon az árért
Hívjon az árért
CL-12 Alaia Blonde Maple

Same as CL-12 Classic with the addition of tweleve Penny & Giles high performance linear faders for extra smooth movement. Includes handcrafted Curly Blonde Maple wood side panels & aluminum panels.

Hívjon az árért
Hívjon az árért
CL-2

Remote 30 mm linear fader for the 788T Digital Recorder. Mounts directly to most boom poles. Equipped with four programmable logic switches. Connects to the 788T through C-Link.

Hívjon az árért
Hívjon az árért
CL-6

Input Controller for 664 & 688 . Adds dedicated front panel controls for inputs 7-12. Also offers LED output meters and additional recording controls.

Hívjon az árért
Hívjon az árért
CL-8

External controller for 788T and 788T-SSD recorders. Designed for over the shoulder or cart applications. Provides control of pre- or post-fader gain, input routing, high-pass filter, input limiters, polarity reversal, input solo, and slate mic. Connects and powered from 788T from USB.

Hívjon az árért
998 855 Ft
(786 500 Ft nettó)
CL-9

Linear fader controller for the 788T Digital Recorder. Includes 100 mm linear faders, rotary trim control, adjustable single-band parametric eq, pan control, and solo per input. Rotary level controls for L, R, Aux 1, and Aux 2 tracks and outputs. Also offers two PL comm return inputs. Powered by 788T USB connection.

998 855 Ft
(786 500 Ft nettó)
Hívjon az árért
Connbox CB12 (2LEMO-Detachable)

The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox 12 is suitable for an ORTF stereo pair of Schoeps CCM in an ORTF Windshield kit (AE).

Hívjon az árért
Hívjon az árért
CS-3

Production case with high-quality strap for use with 302, 702, 702T, 722, and 744T recorders and MixPre-D; NP-type battery compartment and accessory pouch for wireless. Made by CamRade for Sound Devices.

Hívjon az árért
Hívjon az árért
HBN-SQN3

The 13.1' HBN-SQN3 Camera Loom Cable from Ambient Recording features 5-Pin to XLR-3/M with 3.5mm TRS connectors.

Hívjon az árért
Hívjon az árért
HBN10-10

The 13.1' HBN10-10 Hirose 10-Pin Male to Hirose 10-Pin Female Breakaway Cable from Ambient Recording is used with Sound Devices 442 / 442N, 552, SQN4 (old designs), Cooper CS104, and TW Electronic LP44 / LP4 32 Mixers.

Hívjon az árért
Hívjon az árért
HBN10-7

The HBN10-7 Straight Breakaway Cable with 2 x 2 + 2 Leads from Ambient Recording is equipped with Hirose 10-pin male to 7-pin XLR male connectors and is suitable for devices such as the Sound Devices 442 / 442N, 552, SQN4 (old designs), Cooper CS104 and the TW Electronic LP44 / LP4 32.

Hívjon az árért
Hívjon az árért
HBN10Y10-35

The 13.1' HBN10Y10-35 Hirose 10-Pin Male to Hirose 10-Pin Male Breakaway Cable from Ambient Recording comes with a Y cable and has a Hirose 10-pin female connector on one end and dual 3-pin XLR male connectors on the other end with a signal return via a TRS mini plug on the coiled cord.

Hívjon az árért
Hívjon az árért
HBN10Y10-5

The 13.1' HBN10Y10-5 Hirose 10-Pin Male to 7-Pin XLR Male Breakaway Cable from Ambient Recording comes with a Y cable and has a 7-pin XLR female connector on one end and dual 3-pin XLR male connectors on the other end with a signal return via a 5-pin XLR female connector.

Hívjon az árért
Hívjon az árért
HBN12T-10

The HBN12T-10 from Ambient Recording is a straight mixer/camera loom that is equipped with Tajimi 12-pin to Hirose 10F connectors.

Hívjon az árért
Hívjon az árért
HBN12T-7

The HBN12T-7 from Ambient Recording is a straight mixer/camera loom that is equipped with Tajimi 12-pin to XLR-7M connectors.

Hívjon az árért
Hívjon az árért
HBS-ALEXA

The Ambient Recording HBS-ALEXA Coiled Mixer Cable features two 3-pin XLR female and a 3.5mm TRS plug on one end and a 5-pin XLR male connector on the other.

Hívjon az árért
Hívjon az árért
HBS-SQN3Y7-35M

The 4.5 to 16.4' HBS-SQN3Y7-35M Coiled Breakaway Cable for SQN3 from Ambient Recording comes with a Tuchel 5-pin male to 3-pin XLR male connector and return via TRS mini plug on coiled cord for SQN3.

Hívjon az árért
Hívjon az árért
HBS10Y10-35

The 4.6 to 16.4’ HBS10Y10-35 Hirose 10-Pin Male to Hirose 10-Pin Female Coiled Breakaway Cable from Ambient Recording comes with a Y cable and is used with Sound Devices 442 / 442N, 552, SQN4 (old designs), Cooper CS104, and TW Electronic LP44 / LP4 32 Mixers.

Hívjon az árért
Hívjon az árért
HBS10Y10-35W

The 4.6 to 16.4’ HBS10Y10-35W Hirose 10-Pin Male to Hirose 10-Pin Female Coiled Breakaway Cable from Ambient Recording comes with a Y cable and is used with Sound Devices 442 / 442N, 552, SQN4 (old designs), Cooper CS104, and TW Electronic LP44 / LP4 32 Mixers.

Hívjon az árért
Hívjon az árért
HBS10Y10-5

The 4.6 to 16.4’ HBS10Y10-5 Hirose 10-Pin Male to Hirose 10-Pin Female Coiled Breakaway Cable from Ambient Recording comes with a Y cable and is used with Sound Devices 442 / 442N, 552, SQN4 (old designs), Cooper CS104, and TW Electronic LP44 / LP4 32 Mixers.

Hívjon az árért
Hívjon az árért
HBS12H-10

The Ambient Recording HBS12H-10 Coiled Breakaway Cable is designed for the Wendt X4 and Wendt X5.

Hívjon az árért
Hívjon az árért
HBS12H-7

The 4.6 to 16.4’ HBS12H-7 Hirose 12-Pin Male to 7-Pin XLR Male Coiled Breakaway Cable from Ambient Recording is used with Wendt X4 4-Channel and Wendt X5 5-Channel Mixers.

Hívjon az árért
Hívjon az árért
HBS12HY10-35

The 4.6 to 16.4’ HBS12HY10-35 Hirose 12-Pin Male to Hirose 10-Pin Female Coiled Breakaway Cable from Ambient Recording comes with a Y cable and is used with Wendt X4 4-Channel and Wendt X5 5-Channel Mixers.

Hívjon az árért
Hívjon az árért
HBS12HY7-35

The 4.6 to 16.4’ HBS12HY7-35 7-Pin XLR Female to Dual 3-Pin XLR Male Coiled Breakaway Cable from Ambient Recording comes with a Y cable and is used with Wendt X4 4-Channel and Wendt X5 5-Channel Mixers.

Hívjon az árért
Hívjon az árért
HBS12HY7-5

The 4.6 to 16.4’ HBS12HY7-5 Hirose 12-Pin Male to 7-Pin XLR Male Coiled Breakaway Cable from Ambient Recording comes with a Y cable and is used with Wendt X4 4-Channel and Wendt X5 5-Channel Mixers.

Hívjon az árért
Hívjon az árért
HBS12T-10

The Ambient Recording HBS12H-10 Coiled Breakaway Cable is designed for the SQN4S IV (new designs), SQN5, and SQN4Smini.

Hívjon az árért
Hívjon az árért
HBS302-10

The HBS302-10 from Ambient Recording is a coiled mixer/camera loom that is equipped with two XLR-3F connectors and a 3.5 mm TRS connector on one side to and a Hirose-10F connector on the other.

Hívjon az árért
Hívjon az árért
HBS552-10Y7-35

The Ambient Recording HBS552-10Y7-35 Coiled Mixer / Camera Loom for SD 552 Mixer comes with a Hirose 10-pin male and TA-3F connector to a 7-pin XLR male on one end and a HBY7TC-35 Y-breakout cable on the camera side.

Hívjon az árért
Hívjon az árért
HBS552-10Y7-5

The Ambient Recording HBS552-10Y7-5 Coiled Mixer / Camera Loom for SD 552 Mixer comes with a Hirose 10-pin male and TA-3F connector to a 7-pin XLR male on one end and a HBY7TC-5 Y-breakout cable on the camera side.

Hívjon az árért
Hívjon az árért
HBS552Y-7-5

The 70.8 to 157.4" Ambient Recording HBS552Y-7-5 Coiled Mixer Cable for SD 552 Mixer comes with a two Y-breakout cable plus the coiled HBS7-7 breakaway cable.

Hívjon az árért
Hívjon az árért
HBS552Y7-35

The 70.8 to 157.4" Ambient Recording HBS552Y7-35 Coiled Mixer Cable for SD 552 Mixer comes with a two Y-breakout cable plus the coiled HBS7-7 breakaway cable.

Hívjon az árért
Hívjon az árért
HBY10-5

The 11.8" HBY10-5 Breakout Cable from Ambient Recording features a 10-pin Hirose male to dual 3-pin XLR male connector and returns via a 5-pin XLR female connector.

Hívjon az árért
Hívjon az árért
HBY7TC-5

The Ambient Recording HBY7TC-5 Breakout Cable allows you to connect devices with a 7-pin XLR female connector to those with dual 3-pin XLR male connectors.

Hívjon az árért
Hívjon az árért
HBYATC7-35W

The HBYATC7-35W Breakout Y-Cable from Ambient Recording features the mixer-side Y-cable for a Sound Devices 552 mixer-camera loom. At one end of this Y cable is a 7-pin XLR connector.

Hívjon az árért
Hívjon az árért
iTC-552

The Ambient Recording Adapter Cable - Clockit Time Code Output to Input of Sound Devices 552 is an adapter / splitter cable for Clockit time code output to time code input of the Sound Devices 552 mixer / recorder.

Hívjon az árért
Hívjon az árért
iTC-552B

The 19.7” Time Code Patch Cord from Ambient Recording is used to feed time code into the SD552 Sound Devices 552 Field Mixer and display it on the iPod touch, iPhone, and iPad using the Ambient TC-App (sold separately).

Hívjon az árért
Hívjon az árért
iTC-IN3.5

The 2' iTC-IN3.5 Timecode Input Cable from Ambient Recording is a timecode input cable for transferring timecode from any Ambient Lockit timecode product to a mobile Apple product via the headphones connector.

Hívjon az árért
Hívjon az árért
iTC-INB

The ITC-INB Line Level BNC Input Cable for TC App for iPod / iPhone / iPad from Ambient Recording is a time code adapter cable for the TC App for your iPod Touch / iPhone / iPad. It is capable of connecting your Apple device to a line level time code source.

Hívjon az árért
Találatok: 1 - 60 / 251