|
26 543 Ft
(20 900 Ft excl VAT)
|
Schoeps RG 12 Stand connector swivel 12mm for 2*STR
The RG 12 connects two STR vertical support rods or any other rods with 12 mm in diameter. The angle may be adjusted over a wide range. |
26 543 Ft
(20 900 Ft excl VAT) |
|
12 065 Ft
(9 500 Ft excl VAT)
|
Schoeps RG 8 Swivel joint 8/12mm for RC/RL
This swivel joint is used for mounting a Colette active extension tube (RC_) or extension tube of the CCM series (RL_) on an STR support rod. |
12 065 Ft
(9 500 Ft excl VAT) |
|
39 091 Ft
(30 780 Ft excl VAT)
|
Schoeps RG 88 Double swivel joint 8/12mm for R2C
The RG 88 can be used for attaching the double active extension tube R2C KC to an STR support rod with 12 mm diameter. |
39 091 Ft
(30 780 Ft excl VAT) |
|
234 544 Ft
(184 680 Ft excl VAT)
|
Schoeps RL 1200 Microphone extension tube for CCM, Lemo, 120cm, incl. RG 8
The K 5 LU adapter cable is included with the CCM _L, while the RG 8 swivel is included with the RL straight extension tube. |
234 544 Ft
(184 680 Ft excl VAT) |
|
234 544 Ft
(184 680 Ft excl VAT)
|
Schoeps RL 350 Microphone extension tube for CCM, Lemo, 35cm, incl. RG 8
The K 5 LU adapter cable is included with the CCM _L, while the RG 8 swivel is included with the RL straight extension tube. |
234 544 Ft
(184 680 Ft excl VAT) |
|
234 544 Ft
(184 680 Ft excl VAT)
|
Schoeps RL 700 Microphone extension tube for CCM, Lemo, 70cm, incl. RG 8
The K 5 LU adapter cable is included with the CCM _L, while the RG 8 swivel is included with the RL straight extension tube. |
234 544 Ft
(184 680 Ft excl VAT) |
|
225 857 Ft
(177 840 Ft excl VAT)
|
Schoeps RLG 350 U Table tube for Colette, Lemo, 35cm
The Schoeps RLG 350 U is an elegant table tube for CCM _L compact microphones. |
225 857 Ft
(177 840 Ft excl VAT) |
|
202 692 Ft
(159 600 Ft excl VAT)
|
Schoeps RS 420 C Tube with gooseneck element for Colette, 42cm
These goosenecks are used directly between capsules and amplifiers of the Colette series. For mounting in a table top, the AF 1 flange (not included) offers good isolation from solid-borne noise. |
202 692 Ft
(159 600 Ft excl VAT) |
|
110 515 Ft
(87 020 Ft excl VAT)
|
Schoeps S 170 L Short gooseneck for CCM, Lemo, 17cm
The S 170 L is a gooseneck with Lemo connectors at both ends. This version is suggested particularly for installations in which the microphone cables have already been laid down, e.g. in theaters. |
110 515 Ft
(87 020 Ft excl VAT) |
|
191 592 Ft
(150 860 Ft excl VAT)
|
Schoeps S 250 C Gooseneck for Colette, 25cm
These goosenecks are used directly between capsules and amplifiers of the Colette series. For mounting in a table top, the AF 1 flange (not included) offers good isolation from solid-borne noise. |
191 592 Ft
(150 860 Ft excl VAT) |
|
164 084 Ft
(129 200 Ft excl VAT)
|
Schoeps S 250 L5U Gooseneck, 25cm, for CCM, 3/8", with 5m cable to XLR
The cable can be brought out from the side of the gooseneck or, after resoldering the connector, from the center of the gooseneck on through the AF 1 (unit is delivered with cable exiting from the side). |
164 084 Ft
(129 200 Ft excl VAT) |
|
164 084 Ft
(129 200 Ft excl VAT)
|
Schoeps S 250 LU Gooseneck, 25cm, for CCM, XLR
A table microphone can be created with this gooseneck together with the AF 1 elastic suspension. The plug at the end of the tube is connected to the XLR-3 socket of the cable; both parts are then held by the AF 1. |
164 084 Ft
(129 200 Ft excl VAT) |
|
9 169 Ft
(7 220 Ft excl VAT)
|
Schoeps SG 20 Stand Clamp 20/21mm
The base of the SG 20 has a 5/8"-27 NS internal thread. A threaded adapter is supplied for 3/8" and 1/2" mounting. |
9 169 Ft
(7 220 Ft excl VAT) |
|
4 343 Ft
(3 420 Ft excl VAT)
|
Schoeps SGC Miniature stand mount 8mm
The internal thread of the SGC screws onto any 3/8" rod (e.g. vertical support rods STR) or stand adapter. The SGC is an integral part of the HC miniature cable hanger and the TCg table stand. |
4 343 Ft
(3 420 Ft excl VAT) |
|
18 339 Ft
(14 440 Ft excl VAT)
|
Schoeps SGCM Miniature stand mount 8mm, robust metal
The SGCM is a version of the SGC with the clamp made of metal instead of plastic. Its internal thread screws onto any 3/8" rod (e.g. vertical support rods STR) or stand adapter. |
18 339 Ft
(14 440 Ft excl VAT) |
|
12 065 Ft
(9 500 Ft excl VAT)
|
Schoeps SGH Stand clamp for CMH
This stand mount is tapered and designed exclusively for CMH handheld microphones. Thread: 5/8"-27 NS with adapter for 3/8'' and 1/2''. |
12 065 Ft
(9 500 Ft excl VAT) |
|
42 951 Ft
(33 820 Ft excl VAT)
|
Schoeps SGV Stand clamp for V4
The base of the SGV has a 5/8"-27 NS internal thread. A threaded adapter is supplied for 3/8" and 1/2" mounting. |
42 951 Ft
(33 820 Ft excl VAT) |
|
24 130 Ft
(19 000 Ft excl VAT)
|
Schoeps SM 270 Foam Mat for BF 250
Sometimes the existing acoustic isolation of the heavy floor stand BF 250 does not suffice to keep the microphone free of these disturbances. For that reason we offer the SM 270, an isolation mat which is simply placed beneath the BF 250. |
24 130 Ft
(19 000 Ft excl VAT) |
|
151 003 Ft
(118 900 Ft excl VAT)
|
Schoeps Splitterbox M/6U Adapter box AES65 to 6*XLR3M
Schoeps Splitterbox M/6U Adapter box AES65 to 6*XLR3M |
151 003 Ft
(118 900 Ft excl VAT) |
|
369 189 Ft
(290 700 Ft excl VAT)
|
Schoeps SR 1450C BOC Microphone extension tube with gooseneck element for Colette, 145cm, incl. RG 8
Schoeps SR 1450C BOC Microphone extension tube with gooseneck element for Colette, 145cm, incl. RG 8 |
369 189 Ft
(290 700 Ft excl VAT) |
Distributed Brands
