Pack includes: CS-633 bag (by Portabrace)cables: (3) XL-2F, (2) XL-2, (1) XL-LB2; plus batteries: (2) XL-B2, plus storage media (1) 32 GB approved CompactFlash card, and (1) 32 GB approved SD card. 633 Mixer not included.

Cradle for A10-RX with 15-pin D-type adapter. For use with Sony video cameras that have slot-in for wireless,
or Sony extension units with slot-in for wireless. The A-15PIN allows the A10-RX to be used in the Sony slot
directly, without the need for external cables. The audio is passed to the internal slot as two-channel AES
digital audio.

Right-angle RF filter circuit board. Fits Cable Techniques low profile XLR. Pack of 4

Belt clip/holster for the A20-Mini.
The A20-Mini ships with this easy-to-assemble holster. Slide the A20-Mini into the A20-Mini-Holster’s pocket in the orientation that works best for the situation. Fold the security flap over, securing the transmitter in place using the hook-and-loop fastener strips. Use the clip on the back of the holster to attach the transmitter to the talent’s garments.

Production case with high-quality strap for use with 302, 702, 702T, 722, and 744T recorders and MixPre-D; NP-type battery compartment and accessory pouch for wireless. Made by CamRade for Sound Devices.

Production case with high-quality strap for use with the 552 Field Mixer, 788T Recorder, or 788T with CL-8 Controller; with NP type battery compartment, accessory compartment and a door to access 552 and 788T removable media; includes removable rain cover. Made by CamRade for Sound Devices.

Production case for use with the 633 mixer. Offers accessory pouch with pass-through for wireless, bottom access to 7.2 V "L" batteries. Includes removable rain cover and handle. Made by PortaBrace for Sound Devices. Strap not included.

Production Case for 688 and 664 ,made of 1000-denier Cordura® nylon with a rigid plastic frame. Holds Mixer, CL-6 and SL-6 simultanteosuly. Includes Suede Shoulder Strap and Rainhood. Made by PortaBrace for Sound Devices.

Convenient, padded carry case with handles; fits MM-1, MP-1, HX-3, 302, 7-Series recorders; handy to store wallets, keys and mobile phones. Handcrafted in China.

Portabrace model HB-15 medium duty neck strap with metal hooks. For use with CS-633 Production Case.

Battery sled for MixPre recorders. Holds (4) four AA Batteries.
(Not for use with 10T or 10M).

Battery sled for MixPre recorders. Holds (8) eight AA Batteries.

AC wall mount power supply w/USB-C connector and adapter plugs for US, UK, Australia & Europe. Does not recharge batteries. For use with all MixPre recording models.

Hirose DC Input Sled. Powers MixPre Original Series, MixPre-M Series, and MixPre II Series recorders. Input
range: 10-20 V DC.

L-Mount Battery Sled. Holds one L-Mount battery (not included). Powers MixPre Original Series, MixPre-M
Series, and MixPre II Series recorders. Compatible with a single XL-B2, XL-B3 or other Sony L-type battery.

Battery sled for MixPre recorders. Holds 2 hot-swappable, Li-Ion L-mount batteries.

AC wall mount power supply w/USB-C connector and adapter plugs for US, UK, Australia & Europe. Does not recharge batteries. For use with all MixPre recording models.

USB-C to 2x USB-A Y-cable for powering from a computer. For use w/ MixPre recorders. Not for use with 10T or 10M.

ONLY ONE UNIT LEFT
Solid metal base with adjustable height and angle. For use with MixPre Series Recorders & PIX-E monitors with or without the PIX-LR audio accessory attached. Mounts via 1/4" 20-thread mounting hole. Can also be used with any device with 1/4" 20 screw hole. “A” mounting holes for 'permanently' fixing PIX-Base to a table or other structure. Multiple bases can be linked together without tools using interlocking design.

2.5" SSD drive caddy for the 970 Audio Recorder/Player. FW 800 USB 3.0 and eSATAp connections for data transfer.

Compact Flash Caddy interface. Records audio .WAV files to approved removable CF Cards. For use with 970 only.

Rack-Mount kit for the 970. Accommodates (2) rack type recorders. Includes a blank panel for mounting a single unit. 2 RU height.

Shim for use with 7mm drives. Increases SSD thickness from 7 mm to 9 mm making it compatible with the 970. Includes shims for two drives.

240 GB capacity. 2.5" SSD approved for use with the PIX 220i, PIX 240i, PIX 250i, and PIX270i Video Recorders. Preformatted exFAT. No shim required for use with PIX-CADDY2.

PowerStation-8M
The PowerStation-8M provides easy battery charging, file transfer, and timecode jamming of up to eight A20-Minis at a time. Powered via DC (TA4) or USB-C (USB-PD).

128 GB SDXC card that provides data rates of up to 240 MB/s (read) and 100 MB/s (write). The SAM-128 SD
has been optimized and extenseively tested to ensure fast and flawless performance when used with the 8-
Series, 6-Series and MixPre Series.

32 GB, UDMA-7 CompactFlash (CF) card that provides data rates of up to 160 MB/s (read) and 120 MB/s
(write). The SAM-32CF II has been optimized and extensively tested to ensure fast and flawless performance
when used with the 6-Series, 970, and for WAV files on the PIX 260i and PIX 270i.

32GB approved SD/SDHC card for use with Sound Devices and Video Devices products. It is rated at 90 MB/s for read & write speeds (620x).

64GB SDXC card that provides data rates of up to 240 MB/s (read) and 100 MB/s (write). The SAM-64SD has
been optimized and extensively tested to ensure fast and flawless performance when used with the 8-Series,
6-Series and MixPre Series.

Charger for Sony compatible L Series batteries. Charges one battery. Includesg wall & car charger, Euro adapter. Input voltage 110v-240v.

Dual SuperSlot Wireless Module. Compatible with any 8 Series mixer-recorder. UniSlot and SuperSlot
wireless receivers are accepted. The SuperSlot protocol supports up to four channels of wireless audio per
slot. The SL-2 rear panel has two TA3 for an additional four inputs of AES3 audio and two 4-pin Hirose DC
Outputs.

Wireless integration accessory for the 688 and Scorpio. HoldS up to three dual unislot or SuperSlot™ compatible Recievers controedled via the 688 or Scorpio. Adds NP-1 powering option, two 12v isolated outputs & two non isolated outputs for external devices.Plus one USB Charging port. SL-Riser required to secure to Scorpio.

Aluminum chassis coupler used between SL-6 and Scorpio for increased airflow and secure connection, required for SL-6 with Scorpio.

Portable mixer-recorder with 16 mic/line inputs, 32 channels, 12 buses, 36 tracks, 32 channels of Dante I/O,
256 GB internal SSD, 2 SD card slots, USB control surface support via MCU. Dugan Automixing or MixAssist,
16 channels. AES in/out; 12 analog outputs; fully-featured timecode generator. Power via the TA4 DC input or
up to 2 L-Mount batteries (not included). Ships with the XL-WPTA4, XL-ANT2.4, and XL-LCD-PROTECT.

Mixer/Recorder with 16 mic/line preamplifiers, 32 channels of Dante in and out, up to 36 record tracks, AES in and out, 12 analog outputs. Each of the 16 inputs includes built-in analog limiters, high pass filters, delay, 3-band EQ and phantom power. Records simultaneously to internal SSD drive and removable dual SD cards, Includes master timecode generator and Dugan automixing. Powered via 2 x L-Mount Batteries (not included) or external power via TA4 connector. XL-WPTA4 power adapter included. Will charge connected L-Mount Batteries.

Compact, full-featured production mixer with three mic/line inputs, 48 V phantom, T-power, and limiters. Mic/line switchable XLR output. Includes 40-segment LED meter, MS matrix. Powered by battery (3-AA) or external DC. No recorder built-in.

Kit includes: 633 mixer and CS-633 bag (by Portabrace). Also includes cables: (3) XL-2F, (2) XL-2, (1) XL-LB2; plus batteries: (2) XL-B2, plus storage media (1) 32 GB approved CompactFlash card, and (1) 32 GB approved SD card. Order the 633 Pack for the accessory Box only.

Portable mixer-recorder with 6 mic/line inputs, 8 channels, 6 buses, 12 tracks, a 256 GB internal SSD, 2 SD
card slots, USB control surface support via MCU. Dugan Automixing or MixAssist, 8 channels. AES in/out; 6
analog outputs; fully-featured timecode generator. Power via the TA4 DC input or up to 2 L-Mount batteries
(not included). Ships with the XL-WPTA4, XL-ANT2.4, and XL-LCD-PROTECT.

Portable mixer-recorder with 8 mic/line inputs, 16 channels, 10 buses, 20 tracks, 16 channels of Dante I/O,
256 GB internal SSD, 2 SD card slots, USB control surface support via MCU. Dugan Automixing or MixAssist,
16 channels. AES in/out; 8 analog outputs; fully-featured timecode generator. Power via the TA4 DC input or
up to 2 L-Mount batteries (not included). Ships with the XL-WPTA4, XL-ANT2.4, and XL-LCD-PROTECT.

Sound Devices miniature digital wireless transmitter (470-694MHz)

Linear fader controller for 8-Series (833, 888, Scorpio). 16 P&G faders, 16 dedicated trims, additional rotary
controls for bus levels. Panoramic, stowable LCD for metering and display. 41 cm (16.5-inch) wide for cart
applications. Powered by 4-pin XLR 10-18 V DC supply (not included). Includes USB-A to USB-B cable and
¼” TRS to ¼” TRS cable. XL-WP4 Power Supply not included.

Battery-powered stereo headphone amplifier. Three outputs. Accepts balanced and unbalanced line level
inputs. Powered from 2 AA batteries or external DC.

Portable multitrack audio mixer-recorder and USB audio interface. 8 XLR/TRS mic/line inputs 32-bit float
capable; 12 tracks (10 ISO + stereo LR mix);SR up to 192 kHz; two channel balanced TA3 outputs; 3.5mm
stereo output; internal LTC timecode generator n BNC or Aux In/Stereo Out; built-in Bluetooth for wireless
control via Wingman app; USB-A for control surfaces, keyboards, and auto-copy to USB drive. Includes a MX8AA Battery Sled (batteries not included), XL-WPH3 AC Power Supply, and USB-C to USB-C cable.

Portable multitrack audio mixer-recorder and USB audio interface. 3 XLR mic/line inputs. 32-bit float capable;
5 tracks (3 ISO + stereo LR mix); SR up to 192 kHz; 3.5mm stereo output; internal LTC timecode generator
on Aux In/Stereo Out; built-in Bluetooth for wireless control via Wingman app; USB-A for control surfaces,
keyboards, and auto-copy to USB drive. Includes a MX-4AA Battery Sled (batteries not included), MX-PSU
AC Power Supply, and USB-C to USB-C cable.

Portable multitrack audio mixer-recorder and USB audio interface. 4 XLR/TRS mic/line inputs. 32-bit float
capable; 8 tracks (6 ISO + stereo LR mix); SR up to 192 kHz; 3.5mm stereo output; internal LTC timecode
generator on Aux In/Stereo Out; built-in Bluetooth for wireless control via Wingman app; USB-A for control
surfaces, keyboards, and auto-copy to USB drive. Includes a MX-4AA Battery Sled (batteries not included),
MX-PSU AC Power Supply, and USB-C to USB-C cable.

Battery-powered microphone preamplifier with headphone monitoring. 48 V phantom and T-power, limiter,
high-pass filter. Powered from 2 AA batteries or external DC.

Battery-powered single-channel microphone preamplifier, with 48 V phantom, limiter, and high-pass filter.
Powered from 2 AA batteries.

Two-channel, portable, high-resolution USB audio interface for Mac OS and Windows. Balanced mic/line
analog and coaxial/optical SPDIF I/O. Up to 24 bit/192 kHz resolution. 48V phantom, limiters, high-pass filters
on microphone inputs. Stand-alone operation allows use as microphone preamplifier and A/D converter. USB
bus powered.

USB-C-CAP
Replacement rubber caps for USB-C socket, pack of five.

For connection to Wingman® IOS app. WM-Connect uses Bluetooth® Smart technology and comes with a right-angle USB A-to-B adapter and USB A-to-B cable adapter to connect to the 6-Series USB port or a CL-12's USB keyboard port.

Hirose 10-pin to two-XLR (balanced L/R) and 3.5 mm plug (442 , 552 and 664 Stereo Return A) breakout cable; includes in-line 20-foot extension cable; 442, 552 and 664 specific.

Power conditioner for use when powering bus powered external data drives with 702, 702T, 722, and 744T recorders. Recommended only for real time recording to external drives.

3.5-mm male right-angle TRS to 1/4-inch female TRS jack for headphone extension, 12-inch.

TA3-F to TA3-F cable, 442 and 302 mixer linking, also used to connect 442/552 direct outputs to 7-Series TA3 inputs; 12-inch.

TA3-F to XLR-M cable; 25-inch; connects balanced TA3 outputs to balanced XLR inputs; two cables included.

XLR-F to TA3-F cable; 25-inch; connects balanced XLR outputs to balanced TA3 inputs; two cables included.

TA3-F to Unisex XLR cable, 25-inch; connects balanced TA3 to Unisex XLR (M or F) inputs.

3.5 mm to TA3-F audio cable.

TA3-F (type) connectors, bag of four.

788T-specific breakout cable for the DE-15 Multi-pin Connector. Breakout connections include: four female XLR connectors for AES Inputs 1-8, XLR male connector for AES Output 5-6, a 4-pin Hirose female connector, accepts 10-18 VDC input, and a lead for logic in & out.