The A10-RACK offers convenient mounting, powering, RF, and audio connectivity for four uni- or SuperSlot wireless receivers in its 1 RU chassis. It is designed for dual-channel receivers from Audio Limited, including the A10-RX, plus slot receivers from Lectrosonics and Wisycom.

The two-channel A10-RX receiver is an advanced digital tool that works with either one or two A10-TX transmitters. With its Advanced Digital Diversity System the A10-RX receiver selects the best signal between each channel's two receivers.

The two-channel A10-RX receiver is an advanced digital tool that works with either one or two A10-TX transmitters. With its Advanced Digital Diversity System the A10-RX receiver selects the best signal between each channel's two receivers.

Built-in IFB transmitter / receiver for audio, timecode and remote
control commands. Adds a mono headphone output jack to the QRX. Includes bendable IFB antenna.

The QRX200 is a 200 MHz wide ENG receiver. A tunable tracking front end filter is featured in the QRX200 so you can receive any frequency in any block from 20 through 27 or 512 – 698 MHz while still filtering out unwanted RF.

The QRX212 is a dual channel wideband receiver module for use with the Zaxcom RX-12 Digital Wireless Receiver. The modules can be easily added or swapped as necessary.

QRX235 receives up to 4 channels of 100% digital audio from up to 2 transmitters, any combination of mono and stereo transmitters is accepted. The audio output can be either analog or AES. It also features our patented side mounted LED’s, these provide visual confirmation of audio and RF reception.

The QRX300 is a special order receiver dedicated to receive a single channel of ZHD48 modulation. The receiver has very narrow filters that allow for a 50 KHz wide signal to be received with a channel spacing as close as 100 KHz.

Slot-in receiver for RX-12. Dedicated ZHD receiver, receives from ONLY ONE ZHD transmitter, spacing @ 100 KHz.

The QRX335 is an ENG receiver designed to pair with a single Zaxcom High Density transmitter in a matching block for channel-spacing as close as 100 KHz.

RX-12 is a one stop receiver solution for your bag or cart. It contains a 35 MHz tracking front end filter to eliminate interference from unwanted stray RF, an RF amplifier and antenna and power distribution for up to six QRX212 dual receiver modules for the reception of twelve separate TRX transmitters.

The RX-12R is a completely reimagined rack mountable receiver ideal for sound challenges in studio and network applications. Its ergonomic design takes up only one-and-a-half rack spaces in height.

The RX200 is a 200 MHz wide compact battery powered ENG receiver. It has a tunable tracking front end filter for receiving any frequency in any block from 20 through 27, or 512 – 698 MHz, while still filtering out unwanted RF.

The SRX220 is a “Slot-in” receiver that is compatible with the Ambient VSLOT, Panasonic Slot-in cameras, Sound Devices SL-6 and other devices that accept a Slot-in receiver. It features a low profile design, making it the smallest and lightest slot-in receiver on the market.

The URX100 is a multipurpose UHF receiver that can be configured as a camera link receiver, an IFB receiver with walkie talkie interface or a standalone IFB receiver with timecode view and delay.