Linear fader controller for the 688, 664 and 633. Powered by 6-Series USB connection for 688. 633 and 664 require external 5v power via rear USB port.*Not all features available on 664 & 633.

Same as CL-12 Classic with the addition of tweleve Penny & Giles high performance linear faders for extra smooth movement. Includes handcrafted Curly Blonde Maple wood side panels & aluminum panels.

Remote 30 mm linear fader for the 788T Digital Recorder. Mounts directly to most boom poles. Equipped with four programmable logic switches. Connects to the 788T through C-Link.

Input Controller for 664 & 688 . Adds dedicated front panel controls for inputs 7-12. Also offers LED output meters and additional recording controls.

External controller for 788T and 788T-SSD recorders. Designed for over the shoulder or cart applications. Provides control of pre- or post-fader gain, input routing, high-pass filter, input limiters, polarity reversal, input solo, and slate mic. Connects and powered from 788T from USB.

Linear fader controller for the 788T Digital Recorder. Includes 100 mm linear faders, rotary trim control, adjustable single-band parametric eq, pan control, and solo per input. Rotary level controls for L, R, Aux 1, and Aux 2 tracks and outputs. Also offers two PL comm return inputs. Powered by 788T USB connection.

The light-weight Mix-16 is an intuitive control surface solution for Deva 24. Combined, the system delivers 24 track recording that can be controlled by 16 motorized faders in five banks found on the Mix-16. Any combination of input channels on Deva 24 can be assigned to any of the five banks using any combination of analog or digital inputs.

The Mix-8 is a control surface for the embedded digital mixer of the Nomad, Fusion or Deva. Mixing is performed in the digital domain via a floating DSP ensuring the highest quality so there’s no distortion or channel to channel differences. Includes power supply and serial cable for connecting to Nomad.

Requires Nomad 12 Serial # to generate unlock code
Does not include cables or tablet, only compatible with Nomad 12

Nomad’s FP8 is a small lightweight expansion panel control surface that attaches directly to the Nomad mixer / recorder. Includes set of mounting screws.

Programmed USB cable (3').

Serial cable to connect the Mix-8 to Nomad.

3.5mm to 3.5mm tape output to computer or tablet (5').

3.5mm to TA5 Nomad return input (5').

Nomad Touch expands the functionality and features of your Nomad 12 with a touch screen interface designed for use in the sound bag. New ZaxHub integration allows you to use your Nomad Touch along with your FP-8 or Mix-8 and RX-12. Requires Nomad 12 Serial # to generate unlock code. Includes 1 x Serial data cable and 1 x Tablet to Nomad audio cable. Does not include Windwos tablet, only compatible with Nomad 12.

The Oasis is a full featured mixing panel with 8 motorized, touch sensitive faders on 3 active banks for up to 40 assignable fader channels. In addition you’ve got hardware trim controls, transport control, dedicated PFL keys, routing control and more. Includes 1 x Nomad to Oasis USB cable, 1 x Oasis to computer USB cable and 1 x Nomad to computer audio cable. Does not include computer or tablet, only compatible with Nomad 12.

Linear fader controller for 8-Series (833, 888, Scorpio). 16 P&G faders, 16 dedicated trims, additional rotary
controls for bus levels. Panoramic, stowable LCD for metering and display. 41 cm (16.5-inch) wide for cart
applications. Powered by 4-pin XLR 10-18 V DC supply (not included). Includes USB-A to USB-B cable and
¼” TRS to ¼” TRS cable. XL-WP4 Power Supply not included.

Zaxcom Nomad NDFS Spare fader knob decal strip. One strip, comes with 6 x white and 6 x multi colored overlays.