|
34 544 Ft
(27 200 Ft excl VAT)
|
A-BOOM - Accessory plate for A10-TX
Accessory plate for mounting the A10-TX onto microphone boom poles with 3/8 inch thread top screw. |
34 544 Ft
(27 200 Ft excl VAT) |
|
13 462 Ft
(10 600 Ft excl VAT)
|
A-CASE - Neoprene Case for A10-TX
Neoprene Case for A10-TX. |
13 462 Ft
(10 600 Ft excl VAT) |
|
14 478 Ft
(11 400 Ft excl VAT)
|
A-CLIP - Belt Clip for A10-TX
Belt Clip for A10-TX Transmitter (included with A10-TX). |
14 478 Ft
(11 400 Ft excl VAT) |
|
13 462 Ft
(10 600 Ft excl VAT)
|
A-FILTER
Adds improved RF immunity for balanced microphones and cables, specifically when connected to digital
wireless transmitters like the A10-TX. Circuit board solder Installation required. |
13 462 Ft
(10 600 Ft excl VAT) |
|
42 418 Ft
(33 400 Ft excl VAT)
|
A-FLIP A-SL adapter to change orientation of A10-RX
This A-SL adapter changes the orientation of an A10-RX in an SL-6 or A10-RACK. |
42 418 Ft
(33 400 Ft excl VAT) |
|
81 026 Ft
(63 800 Ft excl VAT)
|
A-PLATE - Mounting plate only for A10-RX-SL receiver
Mounting plate spacer for A10-RX-SL receiver. Includes plate only. |
81 026 Ft
(63 800 Ft excl VAT) |
|
187 706 Ft
(147 800 Ft excl VAT)
|
A-RXMON Belt-worn A10-RX-SL slot-in receiver enclosure
Monitor any A10 transmitter on set with this handy belt-worn headphone amp for your A10-RX. The A-RXMON provides a simple, portable solution for easily monitoring two A10-TX audio channels with headphones. |
187 706 Ft
(147 800 Ft excl VAT) |
|
181 610 Ft
(143 000 Ft excl VAT)
|
A-SL - 25 Pin D-Type Uni-/Superslot adapter for the A10-RX
25-Pin D-Type Uni/Superslot adapter to convert the A10-RX-XLR to Uni/Superslot compatible, includes A-PLATE. |
181 610 Ft
(143 000 Ft excl VAT) |
|
13 462 Ft
(10 600 Ft excl VAT)
|
A-SMA - Antenna straight black with nickel plated SMA connector
Antennae, SMA Straight Flex Black with nickel plated SMA connector (included with A10-TX). |
13 462 Ft
(10 600 Ft excl VAT) |
|
14 478 Ft
(11 400 Ft excl VAT)
|
A-SMAR - Antenna right-angled black with nickel plated SMA connector
Antenna, SMA Right Angle Flex Black (included with A10-RX). |
14 478 Ft
(11 400 Ft excl VAT) |
|
160 909 Ft
(126 700 Ft excl VAT)
|
A-XLR - XLR adapter for A10-RX receiver conversion
XLR and power cable adapter to convert the A10-RX-SL to XLR connections. |
160 909 Ft
(126 700 Ft excl VAT) |
|
1 156 716 Ft
(910 800 Ft excl VAT)
|
A10-RACK
The A10-RACK offers convenient mounting, powering, RF, and audio connectivity for four uni- or SuperSlot wireless receivers in its 1 RU chassis. It is designed for dual-channel receivers from Audio Limited, including the A10-RX, plus slot receivers from Lectrosonics and Wisycom. |
1 156 716 Ft
(910 800 Ft excl VAT) |
|
1 437 513 Ft
(1 131 900 Ft excl VAT)
|
A10-RX-SL - Two-channel, dual-diversity receiver, D-sub connector and plate for Uni-/Superslot mount
The two-channel A10-RX receiver is an advanced digital tool that works with either one or two A10-TX transmitters. With its Advanced Digital Diversity System the A10-RX receiver selects the best signal between each channel's two receivers. |
1 437 513 Ft
(1 131 900 Ft excl VAT) |
|
1 437 513 Ft
(1 131 900 Ft excl VAT)
|
A10-RX-XLR - Two-channel, dual-diversity receiver with XLR and power cables
The two-channel A10-RX receiver is an advanced digital tool that works with either one or two A10-TX transmitters. With its Advanced Digital Diversity System the A10-RX receiver selects the best signal between each channel's two receivers. |
1 437 513 Ft
(1 131 900 Ft excl VAT) |
|
904 113 Ft
(711 900 Ft excl VAT)
|
A10-TX-A - Digital body-pack transmitter (470-548MHz)
Compact Digital Transmitter with Built-in Timecode-Enabled Recorder. The core of the A10-TX transmitter is its low-noise, high-dynamic-range analog input. It accepting signals from low-level lavalier microphones to balanced line-level. The 3-pin LEMO input offers analogue limiters, 5 volt bias for lavalier microphones, as well as 12 and 48 volt phantom power for balanced microphones. |
904 113 Ft
(711 900 Ft excl VAT) |
|
904 113 Ft
(711 900 Ft excl VAT)
|
A10-TX-B - Digital body-pack transmitter (518-608MHz)
Compact Digital Transmitter with Built-in Timecode-Enabled Recorder. The core of the A10-TX transmitter is its low-noise, high-dynamic-range analog input. It accepting signals from low-level lavalier microphones to balanced line-level. The 3-pin LEMO input offers analogue limiters, 5 volt bias for lavalier microphones, as well as 12 and 48 volt phantom power for balanced microphones. |
904 113 Ft
(711 900 Ft excl VAT) |
|
904 113 Ft
(711 900 Ft excl VAT)
|
A10-TX-C - Digital body-pack transmitter (594-694MHz)
Compact Digital Transmitter with Built-in Timecode-Enabled Recorder. The core of the A10-TX transmitter is its low-noise, high-dynamic-range analog input. It accepting signals from low-level lavalier microphones to balanced line-level. The 3-pin LEMO input offers analogue limiters, 5 volt bias for lavalier microphones, as well as 12 and 48 volt phantom power for balanced microphones. |
904 113 Ft
(711 900 Ft excl VAT) |
|
904 113 Ft
(711 900 Ft excl VAT)
|
A10-TX-D - Digital body-pack transmitter (534-630MHz)
Compact Digital Transmitter with Built-in Timecode-Enabled Recorder. The core of the A10-TX transmitter is its low-noise, high-dynamic-range analog input. It accepting signals from low-level lavalier microphones to balanced line-level. The 3-pin LEMO input offers analogue limiters, 5 volt bias for lavalier microphones, as well as 12 and 48 volt phantom power for balanced microphones. |
904 113 Ft
(711 900 Ft excl VAT) |
|
Call for pricing
|
AC-BALXLR - Balanced 3-pin XLR female to New 3-pin LEMO, includes improved RFI filter
XLR female to 3-pin LEMO cable - 40.6 cm, used to connect balanced microphones to the A10-TX. |
Call for pricing |
|
70 612 Ft
(55 600 Ft excl VAT)
|
AC-BALXLR-4 - Balanced 3-pin XLR female to New 3-pin LEMO, includes improved RFI filter
XLR female to 3-pin LEMO cable - 40.6 cm, used to connect balanced microphones to the A10-TX. |
70 612 Ft
(55 600 Ft excl VAT) |
|
50 292 Ft
(39 600 Ft excl VAT)
|
AC-TCBNC-IN - Timecode cable - BNC to 3-pin LEMO
Timecode cable, BNC to LEMO 3-pin. To connect external timecode sources to the A10-TX. |
50 292 Ft
(39 600 Ft excl VAT) |
|
39 116 Ft
(30 800 Ft excl VAT)
|
AC-TCBNC-OUT - Timecode cable - 3-pin LEMO to BNC
Timecode cable, LEMO 3-pin to BNC. To send timecode from the A10-TX to external timecode clocks. |
39 116 Ft
(30 800 Ft excl VAT) |
|
67 056 Ft
(52 800 Ft excl VAT)
|
AC-TCLEMO - Timecode cable - 5-pin LEMO to 3-pin LEMO
5-PIN LEMO to 3-PIN LEMO Timecode cable, 40.6 cm. |
67 056 Ft
(52 800 Ft excl VAT) |
