The A-BOOM 2 is a boom pole mount designed specifically for the A20-TX transmitter. It mounts to the top of a cabled or cableless boom pole. It can be positioned facing up or down the boom pole, and the onscreen text of the A20-TX screen will conveniently rotate to allow you to read it at the right orientation.

Adds improved RF immunity for balanced microphones and cables, specifically when connected to digital
wireless transmitters like the A10-TX. Circuit board solder Installation required.

Right-angle RF filter circuit board. Fits Cable Techniques low profile XLR. Pack of 4

This A-SL adapter changes the orientation of an A10-RX in an SL-6 or A10-RACK.

25-Pin D-Type Uni/Superslot adapter to convert the A10-RX-XLR to Uni/Superslot compatible, includes A-PLATE.

Antennae, SMA Straight Flex Black with nickel plated SMA connector (included with A10-TX).

Antenna, SMA Right Angle Flex Black (included with A10-RX).

2 x TA3M, 4-pin Hirose & TA4M A20-RX adaptor

Half-wave end-fed dipole VHF (169-220MHz) antenna with swivel-mount BNC for A20-Nexus and A20-Nexus Go receivers. 

Quarter-wave VHF (169 -220MHz) helical SMA antenna for the A20-RX receiver (Pack of 2)

XLR and power cable adapter to convert the A10-RX-SL to XLR connections.

A20-Mini Dual Battery Adapter for Extended Run Time

The A20-Mini Pouch is a neoprene pouch that allows users to wear the A20-Mini transmitter securely. See our A20-Mini-Holster for other options for wearing the A20-Mini.

Belt clip/holster for the A20-Mini.
The A20-Mini ships with this easy-to-assemble holster. Slide the A20-Mini into the A20-Mini-Holster’s pocket in the orientation that works best for the situation. Fold the security flap over, securing the transmitter in place using the hook-and-loop fastener strips. Use the clip on the back of the holster to attach the transmitter to the talent’s garments.

470-1525MHz SpectraBand omnidirectional antenna, single

8, 12, 16-Channel True Diversity Wireless Receiver with SpectraBand Technology (169 to 1525 MHz)

4-, 6-, 8-Channel True Diversity Wireless Receiver with SpectraBand Technology + VHF (169 MHz – 1525 MHz)

A kétcsatornás A10-RX vevő egy haladó digitális eszköz, amely egy vagy két A10-TX adóval működik. Az Advanced Digital Diversity System segítségével az A10-RX vevő a legjobb jelet választja ki az egyes csatornák két vevője között.

A20-Nexus/Go & PowerStation-8M 1u shelf

Sturdy metal clip to attach the A20-TX transmitter to belts or clothing.

Bolt-action smart switch for A20-TX

XLR female to 3-pin LEMO cable - 40.6 cm, used to connect balanced microphones to the A10-TX.

Straight cut-to-size VHF flexible SMA antenna, single

Production Case for 688 and 664 ,made of 1000-denier Cordura® nylon with a rigid plastic frame. Holds Mixer, CL-6 and SL-6 simultanteosuly. Includes Suede Shoulder Strap and Rainhood. Made by PortaBrace for Sound Devices.

Convenient, padded carry case with handles; fits MM-1, MP-1, HX-3, 302, 7-Series recorders; handy to store wallets, keys and mobile phones. Handcrafted in China.

Portabrace model HB-15 medium duty neck strap with metal hooks. For use with CS-633 Production Case.

Battery sled for MixPre recorders. Holds (4) four AA Batteries.
(Not for use with 10T or 10M).

Battery sled for MixPre recorders. Holds (8) eight AA Batteries.

AC wall mount power supply w/USB-C connector and adapter plugs for US, UK, Australia & Europe. Does not recharge batteries. For use with all MixPre recording models.

Hirose DC Input Sled. Powers MixPre Original Series, MixPre-M Series, and MixPre II Series recorders. Input
range: 10-20 V DC.

L-Mount Battery Sled. Holds one L-Mount battery (not included). Powers MixPre Original Series, MixPre-M
Series, and MixPre II Series recorders. Compatible with a single XL-B2, XL-B3 or other Sony L-type battery.

Battery sled for MixPre recorders. Holds 2 hot-swappable, Li-Ion L-mount batteries.

AC wall mount power supply w/USB-C connector and adapter plugs for US, UK, Australia & Europe. Does not recharge batteries. For use with all MixPre recording models.

USB-C to 2x USB-A Y-cable for powering from a computer. For use w/ MixPre recorders. Not for use with 10T or 10M.

Shim for use with 7mm drives. Increases SSD thickness from 7 mm to 9 mm making it compatible with the 970. Includes shims for two drives.

240 GB capacity. 2.5" SSD approved for use with the PIX 220i, PIX 240i, PIX 250i, and PIX270i Video Recorders. Preformatted exFAT. No shim required for use with PIX-CADDY2.

PowerStation-8M
The PowerStation-8M provides easy battery charging, file transfer, and timecode jamming of up to eight A20-Minis at a time. Powered via DC (TA4) or USB-C (USB-PD).

128 GB SDXC card that provides data rates of up to 240 MB/s (read) and 100 MB/s (write). The SAM-128 SD
has been optimized and extenseively tested to ensure fast and flawless performance when used with the 8-
Series, 6-Series and MixPre Series.

32 GB, UDMA-7 CompactFlash (CF) card that provides data rates of up to 160 MB/s (read) and 120 MB/s
(write). The SAM-32CF II has been optimized and extensively tested to ensure fast and flawless performance
when used with the 6-Series, 970, and for WAV files on the PIX 260i and PIX 270i.

64GB SDXC card that provides data rates of up to 240 MB/s (read) and 100 MB/s (write). The SAM-64SD has
been optimized and extensively tested to ensure fast and flawless performance when used with the 8-Series,
6-Series and MixPre Series.

Charger for Sony compatible L Series batteries. Charges one battery. Includesg wall & car charger, Euro adapter. Input voltage 110v-240v.

Dual SuperSlot Wireless Module. Compatible with any 8 Series mixer-recorder. UniSlot and SuperSlot
wireless receivers are accepted. The SuperSlot protocol supports up to four channels of wireless audio per
slot. The SL-2 rear panel has two TA3 for an additional four inputs of AES3 audio and two 4-pin Hirose DC
Outputs.

Aluminum chassis coupler used between SL-6 and Scorpio for increased airflow and secure connection, required for SL-6 with Scorpio.

Portable mixer-recorder with 16 mic/line inputs, 32 channels, 12 buses, 36 tracks, 32 channels of Dante I/O,
256 GB internal SSD, 2 SD card slots, USB control surface support via MCU. Dugan Automixing or MixAssist,
16 channels. AES in/out; 12 analog outputs; fully-featured timecode generator. Power via the TA4 DC input or
up to 2 L-Mount batteries (not included). Ships with the XL-WPTA4, XL-ANT2.4, and XL-LCD-PROTECT.

Portable mixer-recorder with 6 mic/line inputs, 8 channels, 6 buses, 12 tracks, a 256 GB internal SSD, 2 SD
card slots, USB control surface support via MCU. Dugan Automixing or MixAssist, 8 channels. AES in/out; 6
analog outputs; fully-featured timecode generator. Power via the TA4 DC input or up to 2 L-Mount batteries
(not included). Ships with the XL-WPTA4, XL-ANT2.4, and XL-LCD-PROTECT.

Portable mixer-recorder with 8 mic/line inputs, 16 channels, 10 buses, 20 tracks, 16 channels of Dante I/O,
256 GB internal SSD, 2 SD card slots, USB control surface support via MCU. Dugan Automixing or MixAssist,
16 channels. AES in/out; 8 analog outputs; fully-featured timecode generator. Power via the TA4 DC input or
up to 2 L-Mount batteries (not included). Ships with the XL-WPTA4, XL-ANT2.4, and XL-LCD-PROTECT.

Sound Devices miniature digital wireless transmitter (470-1525MHz) SpectraBand - International Version

With the A20-Outpost-NL, NexLink antennas can be located near the action, along with UHF audio antennas. Remote mounting is simple, using Cat-6 Ethernet cable or even fiber optic Ethernet. One A20-Outpost-NL can cover all the action within a large stadium, with its antennas located in the arena, not at the equipment rack. 

A20-Nexus/Go to 8-Series quick release dock

The A20-SuperNexus is a gamechanger. A 16-channel receiver with HexVersity® (2- to 6-antenna diversity), expandable to 32 channels via software licenses – all in just a 1U 19” rack, A20-SuperNexus keeps your kit small and saves space in your rack. Take it on tour without worrying about tuning bands – it boasts a 169-1525MHz tuning range for worldwide operation. A20-SuperNexus gives you peace of mind with its RF Mirror Mode for full redundant operation.

Sound Devices digital bodypack transmitter SpectraBand + VHF - International Version

Linear fader controller for 8-Series (833, 888, Scorpio). 16 P&G faders, 16 dedicated trims, additional rotary
controls for bus levels. Panoramic, stowable LCD for metering and display. 41 cm (16.5-inch) wide for cart
applications. Powered by 4-pin XLR 10-18 V DC supply (not included). Includes USB-A to USB-B cable and
¼” TRS to ¼” TRS cable. XL-WP4 Power Supply not included.

Battery-powered stereo headphone amplifier. Three outputs. Accepts balanced and unbalanced line level
inputs. Powered from 2 AA batteries or external DC.

Portable multitrack audio mixer-recorder and USB audio interface. 8 XLR/TRS mic/line inputs 32-bit float
capable; 12 tracks (10 ISO + stereo LR mix);SR up to 192 kHz; two channel balanced TA3 outputs; 3.5mm
stereo output; internal LTC timecode generator n BNC or Aux In/Stereo Out; built-in Bluetooth for wireless
control via Wingman app; USB-A for control surfaces, keyboards, and auto-copy to USB drive. Includes a MX8AA Battery Sled (batteries not included), XL-WPH3 AC Power Supply, and USB-C to USB-C cable.

Portable multitrack audio mixer-recorder and USB audio interface. 3 XLR mic/line inputs. 32-bit float capable;
5 tracks (3 ISO + stereo LR mix); SR up to 192 kHz; 3.5mm stereo output; internal LTC timecode generator
on Aux In/Stereo Out; built-in Bluetooth for wireless control via Wingman app; USB-A for control surfaces,
keyboards, and auto-copy to USB drive. Includes a MX-4AA Battery Sled (batteries not included), MX-PSU
AC Power Supply, and USB-C to USB-C cable.

Portable multitrack audio mixer-recorder and USB audio interface. 4 XLR/TRS mic/line inputs. 32-bit float
capable; 8 tracks (6 ISO + stereo LR mix); SR up to 192 kHz; 3.5mm stereo output; internal LTC timecode
generator on Aux In/Stereo Out; built-in Bluetooth for wireless control via Wingman app; USB-A for control
surfaces, keyboards, and auto-copy to USB drive. Includes a MX-4AA Battery Sled (batteries not included),
MX-PSU AC Power Supply, and USB-C to USB-C cable.

Battery-powered microphone preamplifier with headphone monitoring. 48 V phantom and T-power, limiter,
high-pass filter. Powered from 2 AA batteries or external DC.

Battery-powered single-channel microphone preamplifier, with 48 V phantom, limiter, and high-pass filter.
Powered from 2 AA batteries.

Two-channel, portable, high-resolution USB audio interface for Mac OS and Windows. Balanced mic/line
analog and coaxial/optical SPDIF I/O. Up to 24 bit/192 kHz resolution. 48V phantom, limiters, high-pass filters
on microphone inputs. Stand-alone operation allows use as microphone preamplifier and A/D converter. USB
bus powered.

USB-C-CAP
Replacement rubber caps for USB-C socket, pack of five.