Extension cable for all TM3 display units, 10 m, to enlarge the distance between all TM3 interface boxes and TM3 display units up to 12 m. Set includes the required f-f adapter.

Snake cable, 2 m, for TM3 interface box, distributes 25p-Sub-D-M to 2 x XLR-F for Analog In, 3 x XLR-F for AES3 In, and 3 x XLR-M for AES3 Out connectors.

Snake cable, 4 m, distributes 25p-Sub-D to 8 x XLR-M, for "Analog Out" or digital AES3 "Bal.Out" fan-outs of RTW units.

Metal mounting plate for all TM3 display units to be mounted with 3/8 inch holds (e. g. gooseneck, mic stand)

Snake cable, 4 m, distributes 25p-Sub-D to 4 x XLR-M and 4 x XLR - F, for AES3 In/Out connectors.

Wide-range 100 - 240 V AC/24 V DC 2.71 A power supply with corresponding power cable for different power systems.

VGA connecting cable Bürklin 13M4240 type, 5 m, all pins wired, for connecting Remote Display 30010.

Snake cable, 4 m, distributes 25p-Sub-D to 8 x XLR-F for "Meter In analog" or "Analog In" fan-outs of RTW units.

Same as 11900, but fitted with 3G/HD/SD SDI deembedder interface and Dolby® E / Dolby® AC-3 decoders, extended signal routing options and instruments.

Panel mounting kit for Remote Display 30010

Measurement microphone MM1 for calibrating studio loudspeaker system, option for 11900, 31900, 31960

TouchMonitor TM7: main unit with 7" 16 : 9 TFT resistive touch screen in table-top frame, with table-stand and mains adapter, basic 4-channel PPM software: Peak, True Peak, correlation, gain reduction. Display of up to 4 routed channels in a maximum count of 4 groups at a time (single channel or 2-channel stereo).

TM7 OEM panel-mount version (approx. 188 x 109 x 45 mm, W x H x D), w/o power supply, for mounting into front panels, e. g. mixing consoles.

Main unit with 9" 16 : 9 TFT resistive touch screen in table-top frame, with table-stand and mains adapter. Basic 4-channel PPM software: Peak, True Peak, correlation, gain reduction. Display of up to 4 routed channels in a maximum count of 4 groups at a time (single channel or 2-channel stereo).Mulitchannel display and other software modules for expansion are available as options (licences, see SW200nn)

Same as 20900, but without table-top frame, table-stand, and mains adapterfor mounting into e. g. mixing consoles.Mulitchannel display and other software modules for expansion are available as options (licences, see SW200nn) Additionally, one Audio Interface shall be selected and ordered: HW 20911, HW20912, HW20913, HW20914, or HW20915.Order no.: 20900OEM + HW2091n

Remote display 8.4" VGA with keyboard installed beneath, option for SurroundMonitors 11900 and SurroundControl 31900, 31960

SurroundControl: 8-channel monitoring controller with remote control, combined with Surround Sound Analyzer,8-ch. peak program meter, True Peak, Loudness (EBU R128, ITU-R BS.1770-3/1771, ATSC A/85, ARIB, custom mode, LRA instrument), surround multi-correlator, downmix matrix,real time spectrum analyzer (RTA), audio vectorscope,output for VGA display. 19"/1U rack-mount, built-in wide-range power supply.

Same as 31900, but fitted with 3G/HD/SD SDI deembedder interface and Dolby® E / Dolby® AC-3 decoders, extended signal routing options and instruments.

SurroundControl: 8-channel monitoring controller with front-accessible keys, volume control and 6.5" displaycombined with Surround Sound Analyzer, 8-ch. peak program meter, True Peak + Loudness (EBU R128, ITU-R BS.1770-3/1771, ATSC A/85, ARIB, custom, LRA instrument), surround multi-correlator, downmix matrix, real time spectrum analyzer (RTA), audio vectorscope, output for secondary VGA display.Half 19"/3U (video) rack-mount version with mains adapter.Operating voltage 24 V DC, 1.7 A.

Same as 31960, but with 3G/HD/SD SDI deembedder and Dolby® E/AC-3 decoder installed.

Configuration software for Mac OS X® and Windows® for personalizing presets and for the selection, configuration andpositioning of required instruments for TM3 series.The software is available for free at members area of RTW's website (Support/Manuals & Software) under the respectiveTM3 version.

16-ch Audio Interface selection for TM7 series: 8-ch digital AES3 I/O (Sub-D), 8-ch analog input (Sub-D), Ethernet, VGA, 2 x USB 2.0, GPIO, 24 V DC connectors. One main unit shall be ordered simultaneously: Order no.: 20700 + HW20711, or 20700OEM + HW20711.

6-ch Audio Interface selection for TM7 series: 8-ch digital AES3id I/O (BNC), 8-ch analog input (Sub-D), Ethernet, VGA, 2 x USB 2.0, GPIO, 24 V DC connectors. One main unit shall be ordered simultaneously: Order no.: 20700 + HW20712, or 20700OEM + HW20712.

8-ch Audio and 3G-SDI Interface selection for TM7 series: 8-ch digital AES3 I/O (Sub-D) and 3G/HD/SD-SDI interface (In, Through, 2 x BNC), Ethernet, VGA, 2 x USB 2.0, GPIO, 24 V DC connectors. One main unit shall be ordered simultaneously: Order no.: 20700 + HW20714, or 20700OEM + HW20714.

16-ch Audio Interface selection for TM7 series: 16-ch AES3 I/O (2 x Sub-D),Ethernet, VGA, 2 x USB 2.0, GPIO, 24 V DC connectors. One main unit shall be ordered simultaneously: Order no.: 20700 + HW20715, or 20700OEM + HW20715.

8-ch digital AES3 I/O (Sub-D), 8-ch analog input (Sub-D),Ethernet, VGA, 2 x USB 2.0, GPIO, 24 V DC connectors. One main unit shall be ordered simultaneously: Order no.: 20900 + HW20911, or 20900OEM + HW20911.

8-ch digital AES3id I/O (BNC), 8-ch analog input (Sub-D), Ethernet, VGA, 2 x USB 2.0, GPIO, 24 V DC connectors. One main unit shall be ordered simultaneously: Order no.: 20900 + HW20912, or 20900OEM + HW20912.

16-ch AES3 I/O (2 x Sub-D),Ethernet, VGA, 2 x USB 2.0, GPIO, 24 V DC connectors. One main unit shall be ordered simultaneously: Order no.: 20900 + HW20913, or 20900OEM + HW20913.

16-ch AES3id (BNC), Ethernet, VGA, 2 x USB 2.0, GPIO, 24 V DC connectors. One main unit shall be ordered simultaneously: Order no.: 20900 + HW20914, or 20900OEM + HW20914.

16-ch analog input (2 x Sub-D),Ethernet, VGA, 2 x USB 2.0, GPIO, 24 V DC connectors. One main unit shall be ordered simultaneously: Order no.: 20900 + HW20915, or 20900OEM + HW20915.

The 3G-SDI option works as an audio deembedder and allows the simultaneously display of up to 32 channels.

--- Only available, when the order is placed with HW2091n ---

The 3G-SDI option works as an audio deembedder and allows the simultaneously display of up to 32 channels.

--- Only available for retrofit at a later point of time. Upgrade can only be proceeded by factory! ---

Logging console for Windows® OS to collect Loudness and True Peak data of multiple TM7, TMR7, and TM9 with Logging Data Server licence SW20014 activated. Two-stage definition of limits to generate various alarms, status overview of connected devices. The software is available for free at members area of RTW's website (Support/Manuals & Soft-ware) under "PC Software/LQL – Loudness Quality Logger"

SurroundMonitor: Surround Sound Analyzer + 8-ch. Peak program meter, True Peak, Loudness (EBU R128, ITU-R BS.1770-3/1771, ATSC A/85, ARIB, custom, LRA instrument), surround multi-correlator, downmix matrix, real time spectrum analyzer (RTA), audio vectorscope, output for VGA, display. 19"/1U rack-mount, built-in wide-range power supply.

Software licence: Multichannel Mode for TouchMonitor TM7 (20700, 20700OEM) and TM9 (20900, 20900OEM)Expands the signal routing to the simultaneous display ofmore than 4 channels or channel groups. Additional formats: 3.1 Surround, 5.0 Surround, 5.1 Surround, 7.1 Surround (7.1 and 7.1 DD+) and Multichannel (2 to 8 ch. in one block, up to 4 blocks with 3G SDI hardware option)

Software licence: Loudness and SPL display for Touch-Monitor TM7 (20700, 20700OEM), TM9 (20900, 20900OEM),and TMR7 (TMR7, TMR7OEM)Expands basic 4-channel PPM software with Loudness functions (EBU R128, ITU-R BS.1770-3/1771-1, ATSC A/85, ARIB, OP-59, AGCOM, CALM Act, Leq(M), TASA, SAWA, custom) and SPL mode incl. various weighting filters, integration times and SPL value calculation, LRA instrumentFor signals with more than 4 ch. SW20001 is required!

Software licence: RTA - Real Time Analyzer for Touch-Monitor TM7 (20700, 20700OEM), TM9 (20900, 20900OEM),and TMR7 (TMR7, TMR7OEM)Provides on 31 bands a spectral distribution display forsingle channels, channel pairs or groups, plus HP HF bandFor signals with more than 4 ch. SW20001 is required!

Software licence: SSA - Surround Sound Analyzer for Touch-Monitor TM7 (20700, 20700OEM) and TM9 (20900, 20900OEM)

Software licence: Radar display for TouchMonitor TM7 (20700, 20700OEM) and TM9 (20900, 20900OEM)

Software licence: Premium PPM plus Vectorscope for Touch-Monitor TM7 (20700, 20700OEM), TM9 (20900, 20900OEM),and TMR7 (TMR7, TMR7OEM)Multi-standard high resolution PPM display, peak hold, peak memory, Over, classical gas-plasma emu-lation, moving coil instruments (PPM, VU, Loudness), audio vectorscope (dual mode), correlation meter.With licence SW20001 installed, the multichannel PPMs are correspondently expanded and enhanced with Multi-Correlator (up to 10 phase meters for 5.1 format)

Software licence: TCR - Time Code Reader for TouchMonitor Monitor TM7 (20700, 20700OEM), TM9 (20900, 20900OEM), and TMR7 (TMR7, TMR7OEM)

Software licence: BLITS for TouchMonitor TM7 (20700, 20700OEM), and TM9 (20900, 20900OEM)

Software licence: Logging Data Server for TouchMonitor TM7 (20700, 20700OEM), TM9 (20900, 20900OEM), and TMR7 (TMR7, TMR7OEM)

Software licence: TC-RTW for TouchMonitor devices of TC electronic® (TM7/TM9)Kit to convert TM7/TM9 devices of TC electronic® toRTW versions. This Software module is mandatory for theinstallation of licences with upcoming product functionality issued for TM7/TM9 after January 1st, 2016 on TC devices.The kit also includes the RTW logo for replacing the TC logo.

RTW Loudness Tools feature Metering and Loudness display for mono, stereo, multichannel, and surround applications (8 channels max.) and all standard sampling rates up to 96 kHz including all widely used PPM and TruePeak measurements and scales.

RTW Mastering Tools feature extensive analysis and display functions for mastering, metering and loudness measurements for single- up to multichannel applications including a wide range of PPM scales and displays, VU appearance and TruePPM measurements.

Plug-in and stand-alone application free of charge for simultaneously monitoring and metering with MM3 MusicMeter (USB hybrid function) and for remote control of its Start/Stop/Reset functions.

“CLC” software tool for Loudness- and Loudness range target control with „Adaptive Morphing Technologie“ according to all known standards including max TruePeak adjustment. The software may be operated as a PlugIn within a DAW or as Stand-alone application.

Option for 2U mounting of TM3 series products (TM3, TM3-6CH, TM3-3G). Allows mounting of TM3 series units intothe 19"/2U rack frame TM3-MA2U or into other appropriate mechanical environments in customer installations. The USB extension cable is part of the delivery.

4.3 inch 8-channel TouchMonitor as desktop unit with display unit (capacitive touch screen), remote 3G interface box (2 m)and mains adapter. Integrated 16-ch. deembedder for SD (525i, 625i), HD (720p, 1035i, 1080i, 1080p, 1080SF), and 3G (1080p). 3G-SDI input and output (looped through) via BNC. AnalogStereo output via RCA (Line Out) or 3.5 mm jack (Phones),8 x AES3 output via 25-pin Sub-D, analog Aux input via RCA (Aux In).

TM3-3G with full feature set: 4.3 inch 8-channel TouchMonitor as desktop unit with display unit (capacitive touch screen), remote 3G interface box (2 m)and mains adapter. Integrated 16-ch. deembedder for SD (525i, 625i), HD (720p, 1035i, 1080i, 1080p, 1080SF), and 3G (1080p). 3G-SDI input and output (looped through) via BNC.

19“/2U rack carrier to be fitted with up to two TM3 series devices which must feature the TM3-2U option.

2U panel-mount unit with mounting frame for front panels (approx. 82 x 160 x 29.7 mm, W x H x D), USB connecting cable, and USB mains adpater.

Stereo and 5.1 TouchMonitor, desktop unit with 4.3 inch capacitive touch screen and USB power supply for multifunc-tional stereo audio measurements.

Software upgrade for TM3 to enable 6-ch. Mode. Then, Dialnorm measurement is available.

Software bundle with licence upgrade for TM3. Expands feature set of TM3 by software licences:TM3-SW6UPG: Software upgrade to enable 6-ch. Mode.TM3-SWMC: Moving Coil instrument for the display of needle instruments for up to 2-ch. stereo with different scales (PPM, VU, Loudness) and modes.TM3-SWTCR: Timecode Reader with display of an external analog or digital source.Additonally, the Chart instrument is available.

Software bundle with licence upgrade for TM3-3G. Expands feature set of TM3-3G by software licences:TM3-SWDEEM: Deembedded output of up to 16 audio chan-nels via 8 x AES3 outputs (25-pin Sub-D, Bal.Out).TM3-SWMC: Moving Coil instrument for the display of needle instruments for up to 2-ch. stereo with different scales (PPM, VU, Loudness) and modes.TM3-SWMON: Monitoring Control function of displayed audio signals. Monitor level control (can be calibrated).

Software licence to expand feature set of the TM3-3G by an output routing for deembedded audio signals. Functions: Deembedded output of up to 16 audio channels via the 8 x AES3 outputs of the 25-pin Sub-D connector (Bal.Out).

Software licence to expand feature set of the TM3, TM3-3G by the Moving Coil instrument for the display of needleinstruments for up to 2-ch. stereo with different scales (PPM, VU, Loudness) and modes.

Software licence to expand feature set of the TM3-3G by a Monitoring Control function which enables monitoring of dis-played audio signals. Functions: Monitor level control with onscreen level fader (can be calibrated), DIM, Mute, Solo, internal Downmix for multichannel monitoring, audio output of monitoring signals via RCA-, and 3.5 mm jack (analog).