Results 1 - 12 of 17
Results 1 - 12 of 17

Filters

All, or only Basic Products

Results 101 - 120 of 2823
19 990 Ft
(15 740 Ft excl VAT)
5cm SGM Foam & Windjammer (19/22)

The Shotgun Mic Foam and Windjammer Combo from Rycote is a slip on wind solution for shotgun microphones. The foam features a 5cm inner depth and a standard hole opening.

19 990 Ft
(15 740 Ft excl VAT)
19 990 Ft
(15 740 Ft excl VAT)
5cm SGM Foam & Windjammer (24/25)

he Shotgun Mic Foam and Windjammer Combo from Rycote is a slip on wind solution for shotgun microphones. The foam features a 5cm inner depth and a large hole opening.

19 990 Ft
(15 740 Ft excl VAT)
39 980 Ft
(31 480 Ft excl VAT)
5cm SGM Foam (19/22) (10 Pack)

Suitable for pencil microphones, with slots no further than 5 cm from the front of the mic.

39 980 Ft
(31 480 Ft excl VAT)
4 331 Ft
(3 410 Ft excl VAT)
5cm SGM Foam (19/22) (Single)

Suitable for pencil microphones, with slots no further than 5 cm from the front of the mic.

4 331 Ft
(3 410 Ft excl VAT)
39 980 Ft
(31 480 Ft excl VAT)
5cm SGM Foam (24/25) (10 Pack)

Suitable for shotgun microphones, with slots no further than 5 cm from the front of the mic.

39 980 Ft
(31 480 Ft excl VAT)
4 331 Ft
(3 410 Ft excl VAT)
5cm SGM Foam (24/25) (Single)

Suitable for shotgun microphones, with slots no further than 5 cm from the front of the mic.

4 331 Ft
(3 410 Ft excl VAT)
16 650 Ft
(13 110 Ft excl VAT)
5cm SGM Mini Windjammer for foam

This Rycote Windjammer is intended to cover an existing Rycote foam windscreen and deliver added wind protection while capturing audio outdoors.

16 650 Ft
(13 110 Ft excl VAT)
52 273 Ft
(41 160 Ft excl VAT)
5cm Super-Softie (19/22)

Slip-on Windshield with the new 3D-Tex material and open-cell foam suitable for shotgun microphones only, with slots no further than 5cm from the front of the mic and a diameter of 19-22mm.

52 273 Ft
(41 160 Ft excl VAT)
52 273 Ft
(41 160 Ft excl VAT)
5cm Super-Softie (24/25)

Slip-on Windshield with the new 3D-Tex material and open-cell foam suitable for shotgun microphones only, with slots no further than 5cm from the front of the mic and a diameter of 24-25mm.

52 273 Ft
(41 160 Ft excl VAT)
Call for pricing
6AA internal battery holder for Nomad / Maxx

6AA battery holder for Nomad / Maxx.

Call for pricing
792 099 Ft
(623 700 Ft excl VAT)
8 ch. Mic/Line A/D module with Direct Out, DSD/DXD Premium

The AKD8D/P offers ultra-low distortion and noise floor at low levels whilst reducing latency even more. Another remarkable feature of the Merging Audio Interfaces is the low power consumption. The new components reduce that further by saving over 2 Watts per board which could be as much as 12 Watts on a fully loaded Horus.

792 099 Ft
(623 700 Ft excl VAT)
565 785 Ft
(445 500 Ft excl VAT)
8 channel Mic/Line A/D module with Direct Out, up to 192 kHz

The AKD8D/P offers ultra-low distortion and noise floor at low levels whilst reducing latency even more. Another remarkable feature of the Merging Audio Interfaces is the low power consumption. The new components reduce that further by saving over 2 Watts per board which could be as much as 12 Watts on a fully loaded Horus.

565 785 Ft
(445 500 Ft excl VAT)
212 344 Ft
(167 200 Ft excl VAT)
A-15PIN

Cradle for A10-RX with 15-pin D-type adapter. For use with Sony video cameras that have slot-in for wireless,
or Sony extension units with slot-in for wireless. The A-15PIN allows the A10-RX to be used in the Sony slot
directly, without the need for external cables. The audio is passed to the internal slot as two-channel AES
digital audio.

212 344 Ft
(167 200 Ft excl VAT)
32 817 Ft
(25 840 Ft excl VAT)
A-BOOM - Accessory plate for A10-TX

Accessory plate for mounting the A10-TX onto microphone boom poles with 3/8 inch thread top screw.

32 817 Ft
(25 840 Ft excl VAT)
34 544 Ft
(27 200 Ft excl VAT)
A-BOOM 2

The A-BOOM 2 is a boom pole mount designed specifically for the A20-TX transmitter. It mounts to the top of a cabled or cableless boom pole. It can be positioned facing up or down the boom pole, and the onscreen text of the A20-TX screen will conveniently rotate to allow you to read it at the right orientation.

34 544 Ft
(27 200 Ft excl VAT)
13 462 Ft
(10 600 Ft excl VAT)
A-CASE - Neoprene Case for A10-TX

Neoprene Case for A10-TX.

13 462 Ft
(10 600 Ft excl VAT)
14 478 Ft
(11 400 Ft excl VAT)
A-CLIP - Belt Clip for A10-TX

Belt Clip for A10-TX Transmitter (included with A10-TX).

14 478 Ft
(11 400 Ft excl VAT)
13 513 Ft
(10 640 Ft excl VAT)
A-FILTER

Adds improved RF immunity for balanced microphones and cables, specifically when connected to digital
wireless transmitters like the A10-TX. Circuit board solder Installation required.

13 513 Ft
(10 640 Ft excl VAT)
51 435 Ft
(40 500 Ft excl VAT)
A-FILTER-R

Right-angle RF filter circuit board. Fits Cable Techniques low profile XLR. Pack of 4

51 435 Ft
(40 500 Ft excl VAT)
30 937 Ft
(24 360 Ft excl VAT)
A-FLIP A-SL adapter to change orientation of A10-RX

This A-SL adapter changes the orientation of an A10-RX in an SL-6 or A10-RACK.

30 937 Ft
(24 360 Ft excl VAT)
Results 101 - 120 of 2823