|
Call for pricing
|
WSJ-5
The Sanken WSJ-5 Softie Windjammer features a foam lined inner layer and softie material on the outside to provide adequate wind protection for the CSS-5 stereo / mono switchable shotgun microphone. The WSJ-5 slips right onto the microphone without any additional hardware. |
Call for pricing |
|
Call for pricing
|
WSL-11 Large Metal Windscreen (10pcs)
The WSL-11 Large Metal Mesh Windscreen for Sanken COS-11s Series Lavalier Microphones reduces speaking and environmental noise for the Sanken COS-11s series lavalier microphones. |
Call for pricing |
|
109 792 Ft
(86 450 Ft excl VAT)
|
XL-10
Hirose 10-pin to two-XLR (balanced L/R) and 3.5 mm plug (442 , 552 and 664 Stereo Return A) breakout cable; includes in-line 20-foot extension cable; 442, 552 and 664 specific. |
109 792 Ft
(86 450 Ft excl VAT) |
|
43 752 Ft
(34 450 Ft excl VAT)
|
XL-1394
Power conditioner for use when powering bus powered external data drives with 702, 702T, 722, and 744T recorders. Recommended only for real time recording to external drives. |
43 752 Ft
(34 450 Ft excl VAT) |
|
11 582 Ft
(9 120 Ft excl VAT)
|
XL-14
3.5-mm male right-angle TRS to 1/4-inch female TRS jack for headphone extension, 12-inch. |
11 582 Ft
(9 120 Ft excl VAT) |
|
33 299 Ft
(26 220 Ft excl VAT)
|
XL-1B
TA3-F to TA3-F cable, 442 and 302 mixer linking, also used to connect 442/552 direct outputs to 7-Series TA3 inputs; 12-inch. |
33 299 Ft
(26 220 Ft excl VAT) |
|
44 399 Ft
(34 960 Ft excl VAT)
|
XL-2
TA3-F to XLR-M cable; 25-inch; connects balanced TA3 outputs to balanced XLR inputs; two cables included. |
44 399 Ft
(34 960 Ft excl VAT) |
|
44 399 Ft
(34 960 Ft excl VAT)
|
XL-2F
XLR-F to TA3-F cable; 25-inch; connects balanced XLR outputs to balanced TA3 inputs; two cables included. |
44 399 Ft
(34 960 Ft excl VAT) |
|
31 369 Ft
(24 700 Ft excl VAT)
|
XL-3
3.5 mm to TA3-F audio cable. |
31 369 Ft
(24 700 Ft excl VAT) |
|
25 184 Ft
(19 830 Ft excl VAT)
|
XL-3R
ONLY TWO UNITS LEFT ON STOCK - 3.5 mm to TA3-F audio cable. Same as XL-3, but with a right-angle 3.5 mm connector. Use with MixPre-D. |
25 184 Ft
(19 830 Ft excl VAT) |
|
61 443 Ft
(48 380 Ft excl VAT)
|
XL-AB ( Hirose)
Anton-Bauer Power Tap to 4-pin Hirose power cable; 24 in. For PIX-240i and PIX-220i. |
61 443 Ft
(48 380 Ft excl VAT) |
|
115 341 Ft
(90 820 Ft excl VAT)
|
XL-AES
The XL-AES is an optional accessory for the Scorpio, 888, and 833 that provides 8 channels of AES3 audio connectivity through four heavy-duty TA3M input jacks. The accessory mounts directly to the expansion port on the mixer-recorder’s top panel and features a rugged milled aluminum enclosure for years of reliable use. |
115 341 Ft
(90 820 Ft excl VAT) |
|
14 478 Ft
(11 400 Ft excl VAT)
|
XL-ANT2.4
XL-ANT2.4
Replacement Bluetooth antenna for 8-Series mixer-recorders. |
14 478 Ft
(11 400 Ft excl VAT) |
|
7 722 Ft
(6 080 Ft excl VAT)
|
XL-DC
Coaxial power connector, raw, for mating with DC input on MM-1, HX-3. (Also early models 442 and MixPre). |
7 722 Ft
(6 080 Ft excl VAT) |
|
13 995 Ft
(11 020 Ft excl VAT)
|
XL-H
4-pin Hirose connector for mating with the DC power input of the 633, 664, 552, 442, 302, MixPre, MixPre-10T & 7-Series. |
13 995 Ft
(11 020 Ft excl VAT) |
|
26 835 Ft
(21 130 Ft excl VAT)
|
XL-H4
Power adapter cable, 4-pin XLR-M to 4-pin Hirose, 6 in. |
26 835 Ft
(21 130 Ft excl VAT) |
|
31 433 Ft
(24 750 Ft excl VAT)
|
XL-K3
ONLY ONE PACK LEFT ON STOCK - Fader-knob upgrade kit for CL-9. Includes eight knobs, sixteen magnets, and screwdriver for magnetic adjustment. |
31 433 Ft
(24 750 Ft excl VAT) |
|
Call for pricing
|
XL-K7
Trim-knob for 702(T), 722 & 744T. Knob is grey w/ black indicator, includes two knobs, two set screws & hex key. |
Call for pricing |
|
Call for pricing
|
XL-K788
Trim-knob kit for 788T, knob is grey with black indicator. Includes eight knobs, eight set screws and hex key. |
Call for pricing |
|
65 215 Ft
(51 350 Ft excl VAT)
|
XL-LB2
LEMO-5 to BNC-in and BNC-out for time code to camera jamming, 60-inch. |
65 215 Ft
(51 350 Ft excl VAT) |
Distributed Brands
