The Sanken WS-5E Cage Windshield (Rycote AG) features rugged slotted construction to provide adequate wind diffusion for the CSS-5 mono/stereo switchable shotgun microphone.

Mono Cable 12P multi(F) - XLR-3M X 1(2m)

This Sanken WSC-532/2.0 5-Channel to 5x 3-Pin XLR Cable is used to connect the 5-channel WMS-5 microphone to a multi-channel recording device.

This Sanken WSC-532/2.0 5-Channel to 5x 3-Pin XLR Cable is used to connect the 5-channel WMS-5 microphone to a multi-channel recording device. The cable features a proprietary 12-pin connector at one end and five 3-pin XLR plugs at the other end.

This Sanken WSC-551/3.0 12-Pin to 12-Pin Cable is a 12-pin extension cable for the WMS-5 microphone. The cable features a proprietary 12-pin connector at one both ends.

Cam "Y" cable 12P multi(F) - XLR-3M and XLR-5M (0.87m)

Softie windjammer for CMS-10. As a smaller alternative to the Windjammer, the Rycote Softie by Sanken attenuates high wind and atmospheric noises up to 25dB.

The Sanken WSJ-1E Softie Type Cage & Windjammer is designed for use with the CS-1e Shotgun Microphone.

The Sanken WSJ-23 Softie Windjammer features a foam lined inner layer and softie material on the outside to provide adequate wind protection for the CS-2 and CS-3e microphones. The WSJ-23 slips right onto the microphone without any additional hardware.

The Sanken WSJ-5 Softie Windjammer features a foam lined inner layer and softie material on the outside to provide adequate wind protection for the CSS-5 stereo / mono switchable shotgun microphone. The WSJ-5 slips right onto the microphone without any additional hardware.

The WSL-11 Large Metal Mesh Windscreen for Sanken COS-11s Series Lavalier Microphones reduces speaking and environmental noise for the Sanken COS-11s series lavalier microphones.

Hirose 10-pin to two-XLR (balanced L/R) and 3.5 mm plug (442 , 552 and 664 Stereo Return A) breakout cable; includes in-line 20-foot extension cable; 442, 552 and 664 specific.

Power conditioner for use when powering bus powered external data drives with 702, 702T, 722, and 744T recorders. Recommended only for real time recording to external drives.

3.5-mm male right-angle TRS to 1/4-inch female TRS jack for headphone extension, 12-inch.

TA3-F to TA3-F cable, 442 and 302 mixer linking, also used to connect 442/552 direct outputs to 7-Series TA3 inputs; 12-inch.

TA3-F to XLR-M cable; 25-inch; connects balanced TA3 outputs to balanced XLR inputs; two cables included.

XLR-F to TA3-F cable; 25-inch; connects balanced XLR outputs to balanced TA3 inputs; two cables included.