This high-quality extension cable with miniature Binder connectors can be used together with stereo arrangements that use KCY -/- I Y cables.

This stereo adapter cable has a five-pin miniature Binder plug on one end and an XLR-5M plug on the other. The Binder plug fits the Y-cables for the CCM_L compact microphones (e.g. KLY 250/0 SU), such as would be used with the AMS LI elastic suspension for M/S or the WSR MS LI version with windscreen.

These electronic filters can be inserted anywhere in the microphone cable path. The LC 120 U can be used under extreme conditions.

These electronic filters can be inserted anywhere in the microphone cable path. With a rolloff of 18 dB/octave, the LC 60 U suppresses low-frequency acoustic interference without detracting from the sound quality of voice recordings.

The LP 40 filter is designed to extend the frequency response of the SCHOEPS supercardioid (MK 41(V) or CCM 41(V)) with the lowest possible ripple. This makes it ideal for use with the OCT front surround system.

With "Double M/S" Surround, the SCHOEPS M DMS matrix is, in all respects, the simplest and most elegant way to obtain surround signals.

Full set for M/S with shotgun microphone and Fig-8. Set contains: MiniCMIT, CCM 8 L, WSR MS MiniCMIT, KS 5 U, AK SU/2U, SG 20, W 140 b, Premium case for CCM, SGC, K 5 LU, Premium case for CMC/MiniCMIT.

The MINIX CCM LL is a highly effective miniature elastic suspension for the world's smallest professional studio microphones: the SCHOEPS CCM series.

The MS-BLM can be used when making M/S recordings with a BLM 3g.

Ez a mikrofon egy T-formájú, két beépített mikrofon erősítővel felszerelt testből, és egy összeválogatott MK 4 kardioid kapszula párból áll a Colette moduláris rendszerből, melyek egymástól 170mm távolságra vannak rögzítve 110°-os közrezárt szöggel (ORTF rendszer).

The “ORTF Surround” recording method is a new system for the pickup of surround ambience.

The “ORTF Surround” recording method is a new system for the pickup of surround ambience.

The “ORTF Surround” recording method is a new system for the pickup of surround ambience.

The combination of the OSIX with the MK 41 supercardioid and the B 5 D windscreen represents an optimal solution. It offers especially significant improvement for indoor boom operation.

The combination of the OSIX with the MK 41 supercardioid and the B 5 D windscreen represents an optimal solution. It offers especially significant improvement for indoor boom operation.

The PHS 48 can be plugged into a microphone input or cable that carries 48-Volt phantom power, to verify that sufficient current is available to power a SCHOEPS microphone.

The RCMR microphone extension tube from Schoeps is identical in appearance to the well-known RC extension tubes of that company's "Colette" microphone series.

The RCMR microphone extension tube from Schoeps is identical in appearance to the well-known RC extension tubes of that company's "Colette" microphone series.

The RCMR microphone extension tube from Schoeps is identical in appearance to the well-known RC extension tubes of that company's "Colette" microphone series.

Schoeps RCMR: flat charge for output connector including installation

Two capsules from the Colette modular system are screwed onto the front end of the RCY active stereo extension tube.

Two capsules from the Colette modular system are screwed onto the front end of the RCY active stereo extension tube.

Two capsules from the Colette modular system are screwed onto the front end of the RCY active stereo extension tube.

These goosenecks have a miniature Lemo plug for CCM _L compact microphones at the upper end and a short, rigid tube at the bottom. Above this tube the lower part is flexible.

The SA 2 has a miniature elastic suspension which significantly reduces the transmission of handling noise from the instrument to the microphone.

The base of the SG 20 has a 5/8"-27 NS internal thread. A threaded adapter is supplied for 3/8" and 1/2" mounting.

Schoeps SG 22 mod Double Stand Clamp 20/21mm

The SGMSC is used mainly for M/S stereo recording. The two microphones are arranged one above the other positioned for the closest possible coincidence, and the pair can then be tilted to any desired angle with a swivel joint.

SK 5 LU has a short, slender gooseneck element, a miniature Lemo plug for a CCM compact microphone on the front end, and an XLR-3M at the other end.

Schoeps SR 1200 C Microphone extension tube with gooseneck element for Colette, 120cm, incl. RG 8

Schoeps SR 1200 KC 0,5 Microphone extension tube with gooseneck element for Colette, 120cm, 50cm cable, incl. RG 8

Schoeps SR 1200 L Microphone extension tube with gooseneck element, 120cm, for CCM, Lemo, incl. RG 8

Schoeps SR 350 C Microphone extension tube with gooseneck element for Colette, 35cm, incl. RG 8

Schoeps SR 350 KC 0,5 Microphone extension tube with gooseneck element for Colette, 35cm, 50cm cable, incl. RG 8

Schoeps SR 350 L Microphone extension tube with gooseneck element, 35cm, for CCM, Lemo, incl. RG 8

Schoeps SR 700 C Microphone extension tube with gooseneck element for Colette, 70cm, incl. RG 8

Schoeps SR 700 KC 0,5 Microphone extension tube with gooseneck element for Colette, 70cm, 50cm cable, incl. RG 8

Schoeps SR 700 L Microphone extension tube with gooseneck element, 70cm, for CCM, Lemo, incl. RG 8

The VA 1 is designed to clamp onto the body of a violin. A leather covering on all points of contact prevents damage to the instrument's surface finish.

The VA 2 is designed to clamp onto the body of a violin. A leather covering on all points of contact prevents damage to the instrument's surface finish.

The VA 3 is designed to clamp onto the body of a violin. A leather covering on all points of contact prevents damage to the instrument's surface finish.

The VMS 5 U places hardly any such limitation on the performance of the microphones. In addition, its frequency response leaves nothing to be desired.

The WB is su­i­ta­ble for CMC or CMD 2 U mi­cro­pho­nes with UMS 20, as well as KC Active Cables with MK capsules or CCM compact mi­cro­pho­nes.

The WSR MS consists of an elastic suspension (AMS_) and a basket-type windscreen with Windjammer. It is intended for one or two small microphones. It allows mono as well as M/S stereo recordings.

Wireless integration accessory for the 688 and Scorpio. HoldS up to three dual unislot or SuperSlot™ compatible Recievers controedled via the 688 or Scorpio. Adds NP-1 powering option, two 12v isolated outputs & two non isolated outputs for external devices.Plus one USB Charging port. SL-Riser required to secure to Scorpio.

Compact, full-featured production mixer with three mic/line inputs, 48 V phantom, T-power, and limiters. Mic/line switchable XLR output. Includes 40-segment LED meter, MS matrix. Powered by battery (3-AA) or external DC. No recorder built-in.

Six input compact mixer with integrated 10-track recorder and time code. Three mic/line inputs on XLR plus three line-only inputs on TA3. L/R output plus four added output buses. AES3/AES42 input and selectable AES3 output. Records broadcast WAV files up to 24-bit @ 192 kHz or MP3 to SD and CF cards. Powered by ext. DC (12-18V), Sony L-type (x2) or 6 AA (LR6) batteries. Features PowerSafe.

12-bemenetes hordozható keverő 16-sávos beépített rögzítővel és timecode-dal. Hat mikrofon-vonal bemenetet biztosít fantomtáppal, felüláteresztő szűrővel és limiterrel, valamint ezen felül hat vonal-szintű bemenetet is. A felvételeket WAV vagy MP3 fájlként SD és Compact Flash memóriakártyákra rögzíti. A tápellátást 10-18 VDC vagy 5-AA elemek biztosítják.

12-csatornás hordozható keverő beépített 16-sávos rögzítővel, timecode-dal és PowerSafe technológiával. Hat mikrofon/vonal bemenetet biztosít fantomtáppal, felüláteresztő szűrővel, limiterrel és ezen felül hat vonalszintű bemenetet is. Master L/R outputs plus aux buses. Fel van szerelve MixAssist-tal, valamint digitális keveréssel és routing-gal. A felvételeket 192hz-es WAV fáljkent, vagy MP3-ként SD és Compact Flash memóriakártyákra rögzíti. 10-18 VDC vagy 5-AA elemekkel működik.

Rack-mounted audio recorder with time code. 64-track mono or polyphonic WAV file recording. I/O includes 8-balanced line level, 8-AES3, 64-Dante, and 64-MADI. Word clock I/O. Accepts two front-panel-mounted SATA drives in caddies plus two-back panel eSATA-connected drives. RS-422 and embedded web-server control. XL-WP4 Power supply included. Rack kit, Drives and Caddys not included.

4-­input, 4-­output analog-­to-­Dante interface with headphone monitor. Connects four microphone or level-­level inputs to a Dante audio network. Additionally, four Dante signals can output to balanced analog. Inputs or outputs can be routed to headphones for signal monitoring and metering. Includes IEC C19 AC power cable.

Stereo Windshield WS AC MS Kit is suitable for Schoeps CCM microphones in MS stereo configuration. It features a half-module bar and utilises a traditional hoop & band suspension with 21mm back-to-back clips. No Connbox included.

Stereo Windshield WS AC XY/MS Kit is suitable for Schoeps CCM microphones and Sennheiser MKH 8040/50 microphones. It features a half-module bar with traditional hoop & band suspension plus an adjustable XY/MS rig with 21mm clips.

Stereo Windshield WS AD MS Kit is suitable for a pair of microphones in MS stereo configuration where the longest mic is 90mm. (Connbox not included)

Stereo Windshield WS AE MS Kit is suitable for microphones 19 - 25mm in diameter and up to 140mm in length. This kit is also a popular choice for Sennheiser MKH 30/40/50 MS combinations. No Connbox is included.

Stereo Windshield WS AE ORTF Kit (LEMO) is suitable for ORTF configuration with compact condenser microphones including a Schoeps CCM pair. (LEMO Connbox included)

Suitable for microphones 19 - 25mm in diameter and up to 190mm in length.

Suitable for single shank microphones 30mm in diameter and up to 190mm in length.

Suitable for microphones 19 - 25mm in diameter and up to 250mm in length.

Suitable for single shank microphones 30mm in diameter and up to 250mm in length.