sanken_logo_158x53

Filters

All, or only Basic Products

Results 121 - 180 of 233
1 192 530 Ft
(939 000 Ft excl VAT)
CUX-100K

Super Wide Range Microphone (20Hz to 100kHz)
An omni/cardioid pattern super wide range condenser microphone with unprecedented 20Hz to 100kHz frequency response.

1 192 530 Ft
(939 000 Ft excl VAT)
Call for pricing
Doughnut rubber ring set

Spare rubber ring set (F, R, screw) for CMS-10 suspension, for maintenance, (a part of suspension cylinder set)

Call for pricing
Call for pricing
FM-BE Front mesh part for COS-11D series (10pcs) - Beige

The 10-pack, beige FM-11 Mesh Cover from Sanken is designed for use with COS-11 Omnidirectional Miniature Electret Lavalier Microphones.

Call for pricing
Call for pricing
FM-BK Front mesh part for COS-11D series (10pcs) - Black

The 10-pack, black FM-11 Mesh Cover from Sanken is designed for use with COS-11 Omnidirectional Miniature Electret Lavalier Microphones.

Call for pricing
Call for pricing
FM-GY Front mesh part for COS-11D series (10pcs) - Gray

The 10-pack, gray FM-11 Mesh Cover from Sanken is designed for use with COS-11 Omnidirectional Miniature Electret Lavalier Microphones.

Call for pricing
Call for pricing
FM-WH Front mesh part for COS-11D series (10pcs) - White

The 10-pack, white FM-11 Mesh Cover from Sanken is designed for use with COS-11 Omnidirectional Miniature Electret Lavalier Microphones.

Call for pricing
Call for pricing
FW-11 Foam Windscreen (11 colors in 1 pack)

The FW-11 Foam Windscreen for Sanken COS-11s Series Lavalier Microphones - 11-Pack (Color Mix) reduces speaking and environmental noise for the Sanken COS-11s series lavalier microphones.

Call for pricing
Call for pricing
FW-11 HWM-BE Foam Windscreen (5 pieces) - Beige

Foam Windscreen for COS-11D HWM, beige color, 5 pieces in 1 pack.

Call for pricing
Call for pricing
FW-11 HWM-CC Foam Windscreen (5 pieces) - Cocoa color

Foam Windscreen for COS-11D HWM, cocoa color, 5 pieces in 1 pack.

Call for pricing
Call for pricing
FW-11-BK Foam Windscreen (black only 11 pcs in 1 pack)

The FW-11 Foam Windscreen for the Sanken Cos-11 uses a foam material to greatly minimize noise due to inherent wind and other sources. The FW-11 will work for the Cos-11 and Cos-22 microphones.

Call for pricing
Call for pricing
FW-11-DGY Foam Windscreen (dark gray only 11 pcs in 1 pack)

The FW-11 Foam Windscreen for the Sanken Cos-11 uses a foam material to greatly minimize noise due to inherent wind and other sources. The FW-11 will work for the Cos-11 and Cos-22 microphones.

Call for pricing
Call for pricing
GS-1

Suspension Hand grip SH-1+HG-1

Call for pricing
Call for pricing
GS-100

Suspension holder

Call for pricing
Call for pricing
GS-180A

Suspension holder for one CUW-180

Call for pricing
Call for pricing
GS-180W

Suspension holder for two CUW-180

Call for pricing
Call for pricing
GS-180WS

Surround set including cage, suspension, jammer for two CUW-180

Call for pricing
Call for pricing
GS-180XY

CUW-180 one XY set, cage, jammer, suspension

Call for pricing
Call for pricing
GS-23

The Sanken GS-23 Microphone Handgrip & Shockmount is specifically designed for the Sanken CS-2 microphone. The GS-23 mount features a shockmount, ergonomic handgrip and may also be mounted onto a boompole.

Call for pricing
Call for pricing
GS-5E

Suspension handgrip

Call for pricing
Call for pricing
H-21F Microphone Holder

Microphone Holder for Sanken Cardioid Condenser Microphone CU-31 or CU-32.

Call for pricing
Call for pricing
HC-11 Holder Clip (10 pcs) - Beige

Sanken HC-11 Horizontal Clip is designed specifically for use with the COS-11 miniature lavalier microphone.

Call for pricing
Call for pricing
HC-11 Holder Clip (10 pcs) - Black

Sanken HC-11 Horizontal Clip is designed specifically for use with the COS-11 miniature lavalier microphone.

Call for pricing
Call for pricing
HC-11 Holder Clip (10 pcs) - Gray

Sanken HC-11 Horizontal Clip is designed specifically for use with the COS-11 miniature lavalier microphone.

Call for pricing
Call for pricing
HC-11 Holder Clip (10 pcs) - White

Sanken HC-11 Horizontal Clip is designed specifically for use with the COS-11 miniature lavalier microphone.

Call for pricing
Call for pricing
HC-11V Vertical Holder Clip (10 pcs) - Beige

Sanken HC-11V Vertical Clip is designed specifically for use with the COS-11 miniature lavalier microphone.

Call for pricing
Call for pricing
HC-11V Vertical Holder Clip (10 pcs) - Black

Sanken HC-11V Vertical Clip is designed specifically for use with the COS-11 miniature lavalier microphone.

Call for pricing
Call for pricing
HC-11V Vertical Holder Clip (10 pcs) - Gray

Sanken HC-11V Vertical Clip is designed specifically for use with the COS-11 miniature lavalier microphone.

Call for pricing
Call for pricing
HC-11V Vertical Holder Clip (10 pcs) - White

Sanken HC-11V Vertical Clip is designed specifically for use with the COS-11 miniature lavalier microphone.

Call for pricing
Call for pricing
HC-11W - Holder Clip Double for 2 COS-11 D (10 pcs) - Beige

The Sanken Double Clip for COS-11 Microphone. This model accommodates up to 2 microphones.

Call for pricing
Call for pricing
HC-11W - Holder Clip Double for 2 COS-11 D (10 pcs) - Black

The Sanken Double Clip for COS-11 Microphone. This model accommodates up to 2 microphones.

Call for pricing
Call for pricing
HC-11W - Holder Clip Double for 2 COS-11 D (10 pcs) - Gray

The Sanken Double Clip for COS-11 Microphone. This model accommodates up to 2 microphones.

Call for pricing
Call for pricing
HC-11W - Holder Clip Double for 2 COS-11 D (10 pcs) - White

The Sanken Double Clip for COS-11 Microphone. This model accommodates up to 2 microphones.

Call for pricing
Call for pricing
HC-22

The Sanken Holder Clip for COS-22 Microphone HC-22 is a clip designed specifically for use with the HC-22 microphone. Use this practical microphone clip to perfectly position your microphone for optimum recording results.

Call for pricing
Call for pricing
HCH-180

Holder for center microphone (CS-1) (2qty)

Call for pricing
Call for pricing
HG-1

Handgrip part only

Call for pricing
Call for pricing
K-BWC Camera mount for SH-1

Camera mount for SH-1, for Ø 26mm mic holder

Call for pricing
Call for pricing
K-BWJ

Camera mount for SH-1, for Ø 21mm mic holder

Call for pricing
Call for pricing
K-BWS

Camera mount for SH-1, for Ø 24mm mic holder

Call for pricing
Call for pricing
MB-2D (NE)

Matrix converter from M-S to L-R, angle adjustable

Call for pricing
Call for pricing
P-01-PT

48V phantom I/F, XLR-3M output

Call for pricing
Call for pricing
P-11BPC for RAMSA

COS-11DBP I/F part with Hirose 4Pin connector for RAMSA.

Call for pricing
Call for pricing
P-11BPC for SONY

COS-11DBP I/F part with Hirose 4Pin connector for SONY.

Call for pricing
Call for pricing
P-11DBP-PT

Sanken P-11DBP-PT - AA battery & P48V I/F part only of COS-11DBP/with 5cm cable stripped end.

Call for pricing
Call for pricing
P-11DPT

The Sanken P-11X-PT Phantom Power Supply is intended to power the COS-11DPT microphones with external phantom power. The power supply features an unterminated pigtail for wiring the microphone to the input, an XLR output and a belt-clip.

Call for pricing
Call for pricing
P-11RC for RAMSA

COS-11D I/F part with Hirose 4Pin connector.

Call for pricing
Call for pricing
P-11RC for SONY

COS-11D I/F part with Hirose 4Pin connector.

Call for pricing
Call for pricing
PIN-11 Holder with Safety Pin (10pcs)

The Sanken Microphone Clip with Safety Pin for COS-11S Microphone PIN-11 is a clip designed specifically for use with the HC-11S miniature lavalier microphone.

Call for pricing
Call for pricing
Plastic case for COS-11DPT and COS-11DR

Plastic case for COS-11DPT and COS-11DR

Call for pricing
Call for pricing
RB-01

The Sanken RB-01 Rubber Base is an accessory for the CUB-01 miniature boundary microphone. The RB-01 provides adequate isolation from structure born vibration and noise. The double-sided adhesive secures the CUB-01 microphone and the rubber base to the desktop surface.

Call for pricing
Call for pricing
RB-100

Spare rubber parts, 2 in 1 Set for GS-100.

Call for pricing
2 946 Ft
(2 320 Ft excl VAT)
RM-11 Rubber Mount - Beige

Sanken RM-11 Rubber Microphone Mount is a rubber mount designed specifically for use with the COS-11D miniature lavalier microphone.

2 946 Ft
(2 320 Ft excl VAT)
2 946 Ft
(2 320 Ft excl VAT)
RM-11-BK Rubber Mount - Black

Sanken RM-11-BK Rubber Microphone Mount is a rubber mount designed specifically for use with the COS-11D miniature lavalier microphone.

2 946 Ft
(2 320 Ft excl VAT)
Call for pricing
RM-11C-BK Rubber Mount with holder clip (10pcs) - Black

Rubber Mount with holder clip (10pcs) - Black

Call for pricing
Call for pricing
Rubber String set for S-41

Spare rubber string for S-41, two in one set.

Call for pricing
Call for pricing
Rubber String set for S-44X

Spare rubber string for S-44X, two in one set.

Call for pricing
Call for pricing
S-41

Elastic suspension shock mount for the Sanken CU-41.

Call for pricing
Call for pricing
S-44XII

Elastic suspension

Call for pricing
Call for pricing
S-55

Suspension holder

Call for pricing
Call for pricing
SC-532/0.3

This Sanken SC-532 5-Pin to 2 3-Pin XLR Male Adapter Y-Cable is an adapter Y-cable with a 5-pin XLR female plug at one end and two 3-pin XLR male plugs at the other end. It is used to split two-channel signals into two mono channels, when using for example a power supply.

Call for pricing
Call for pricing
SC-532/1.8

XLR-5F to two XLR-3M "Y" cable 1.8m

Call for pricing
Results 121 - 180 of 233