The Rycote Hi-Wind Cover is a short hair wind cover, measured to fit the Neumann KM120 and KM140 microphones. The wind cover drapes over an existing zeppelin type windscreen such as the Rycote windshield system.

The Rycote Hi-Wind Cover AE Windshield 022628 is a fitted, microphone windshield designed to reduce ambient wind noise when used with a wide range of consumer and professional microphones.

The Rycote Hi-Wind Cover AF Windshield 022629 is a fitted, microphone windshield designed to reduce ambient wind noise when used with a wide range of consumer and professional microphones.

The Rycote Hi-Wind Cover AG Windshield 022630 is a fitted, microphone windshield designed to reduce ambient wind noise when used with a wide range of consumer and professional microphones.

The Rycote Hi-Wind Cover is sized for use with the Extended Stereo Ball Gag windshield. The Hi-Wind Cover is a cost effective protective windscreen that effectively minimizes noise due to excessive wind.

The Windjammer for Super-Shield from Rycote is a synthetic fur cover which is designed to fit on top of a large Super-Shield pod to provide protection against extreme wind noise.

The Windjammer for Super-Shield from Rycote is a synthetic fur cover which is designed to fit on top of a medium Super-Shield pod to provide protection against extreme wind noise.

The Windjammer for Super-Shield from Rycote is a synthetic fur cover which is designed to fit on top of a small Super-Shield pod to provide protection against extreme wind noise.

Suspension Large (XLR-3F) 68 Duo Heavy is suitable for shotgun mics in a Windshield 6 no longer than 400mm and 19-34mm diameter with a 3 Pin XLR.

Suspension Large (XLR-3F) 72 Duo is suitable for long shotgun mics in a Windshield 7, 8, 8J or 11 no longer than 575mm with a diameter 19-34mm and a 3 Pin XLR connector.

Suspension Medium (XLR-3F) 62 is suitable for small diaphragm condensers up to 160mm in length and a diameter of 19-25mm with a 3-Pin XLR connector such as the Sennheiser MKH 50 or the Schoeps CMC Series.

Suspension Medium (XLR-3F) 68 Duo is suitable for shotgun microphones in a WS 4 or WS 295 up to 350mm in length and 19-34mm diameter with a 3 Pin XLR.

Suspension Medium (XLR-3F) 72 is suitable for short diaphragm condenser and shotgun microphones no longer than 210mm with a 19-25mm diameter and a 3 Pin XLR connector.

Suspension Medium (XLR-5F) 68 Duo is suitable for stereo mics up 270mm long with diameter 19-34mm and a 5-Pin XLR Connector in a Windshield 3 or 4. Suitable for the Rode NT4 and the Sennheiser MKH 418.

Suspension X-Small (XLR-3F) is suitable for small diaphragm condenser mics in a WS 10 up to 70mm in length and 19-25mm diameter with a 3 Pin XLR.

Suspension XX-Small (MZL) is suitable for a Sennheiser MKH 8020/40/50 in a Windshield 9 using the remote MZL connection.

Suspension XX-Small is suitable for compact condenser mics such as the Schoeps CCM or Sennheiser MKH 8000 series in a WS9 using a Lemo or Remote MZL cable respectively.

Suspension XX-Small MS is suitable for a Schoeps CCM MS pair in an AC Stereo Windshield.

Suitable for use with the Windshield 1.

Suitable for use with the Windshield 2.