Lockit TC output cable to Lemo-3-pin
Lemo Series 0B. 5-pin to Lemo-00-3-pin, screwlock, length approx. 40

The 16" LEMO 5-Pin to BNC Timecode Cable from Ambient Recording is an output cable designed for use with timecode devices. Viewing the plugged connector from the back with the red dot at 6 o'clock, the cable has an angle of 180°.

The 16" LEMO 5-Pin to BNC Timecode Cable from Ambient Recording is an output cable designed for use with timecode devices. Viewing the plugged connector from the back with the red dot at 9 o'clock, the cable has an angle of 270°. The direction of the outlet cannot be changed.

The 16" LEMO 5-Pin to BNC Timecode Cable from Ambient Recording is an output cable designed for use with timecode devices. Viewing the plugged connector from the back with the red dot at 3 o'clock, the cable has an angle of 90°.

The LTC-OUT/EPIC Lockit Timecode Output Cable from Ambient Recording is used to connect Red Epic/Scarlet cameras to the company's Lockit System (Master Lockit / Lockit Sync Box / Tiny Lockit).

The 23.6" LEMO 0B 5-Pin to TA3F Timecode-Input Cable from Ambient Recording is used to feed time code into the SD 552 Sound Devices 552 Field Mixer.

The LTC-OUT35 Timecode Output Cable by Ambient Recording is a LEMO 5-pin to 3.5mm TRS right-angle plug. The cable has a 40 db pad for TC TTL level to microphone input for DSLR, wired to ring, right channel.

The Ambient Recording LTC-OUT35/35F TC-OUT Cable with LEMO 5-Pin to 90 Degrees + Jack is used to feed microphone and time code into a DSLR camera. The unit contains a 7.87" microphone cable to connect to the left channel and a 15.75" time code cable to connect to the right channel.

The Ambient Recording LTC-OUT35EW Timecode Output Cable is a LEMO 5-pin female screw-on to 3.5mm male cable. It can be used to output audio from an Ambient Clockit Timecode System to an external audio device with a 3.5mm female connector.

Suitable for M58/SM58/MCE82.

The Mini Windjammer for the Marantz PMD 661 provides excellent wind isolation for capturing audio in high-wind environments.

The Mini Windjammer for the Marantz PMD620 and Tascam DR-1 provides excellent wind isolation for capturing audio in high-wind environments.

Say hello to the technology that provides what is truly the most powerful audio engine on the market today for Pyramix and Ovation.

Able to process up to 384 discreet Inputs and Outputs (768 simultaneous) and able to work at sample rates up to 384 kHz and even DSD256, Masscore has got completely unique abilities in the DAW world.

For engineers who need the best, MassCore is the ultimate choice.

The Zax-Maxx has 6 analog inputs, 4 with mic pre amps featuring NeverClip™ and 2 AES digital inputs that can be used with AES42 microphones. Includes 1 x 6AA battery holder and 1 x fader decal strip.

The Maxx 2-Channel Transmitter & Timecode Option enables the Maxx to transmit two channels of audio and SMTPE timecode to any Zaxcom ENG receiver. (The QRX100 requires the QIFB option installed for time code reception.) Includes 1 x SMA antenna.

Maxx fully loaded is the basic model four input/ 2-channel recorder loaded with the following options: four channels of AES/AES42 in with sample rate conversion; two channel transmitter with time code option (must specify transmitter block); six channel recording optionMaxx with built-in transmitter, must specify transmitter frequency.

Matrix converter from M-S to L-R, angle adjustable