Protect your Modular Windshield Kit 8 from the bad weather with the Rycote Duck Rain Cover 8!

The Mini Windjammer for the Edirol R09 provides excellent wind isolation for capturing audio in high-wind environments.

Suitable for Edirol RO5/Tascam DR05.

Suitable for camera-mounted mics, for use over a foam windshield of 40 mm diameter and 75 mm long.

Extended Small Mini Windjammer

The Windshield Extension 1 is designed to extend the Modular Windshield 4 (330mm) to make a Windshield 5 (400mm).

The Windshield Extension 2 is designed to extend the Modular Windshield 4 (330mm) to make a Windshield 6 (450mm).

The Windshield Extension 295 is designed to extend the Modular Windshield 4 (330mm) to make a Windshield 11 (625mm).

The Windshield Extension 3 is designed to extend the Modular Windshield 4 (330mm) to make a Windshield 7 (500mm).

The Windshield Extension 4 is designed to extend the Modular Windshield 4 (330mm) to make a Windshield 8 (590mm).

The Windshield Extension 220 is designed to extend the Modular Windshield 295 to make a Windshield 8J (515mm). Suitable for the Sennheiser MKH 8070 (with MZX XLR module attached and no MZF filter).

Designed for use with Lavalier microphones worn on the outside of clothing, the Lavalier Windjammer (or Furry) is the most heavy-duty of Rycote's subminiature Lavalier microphone products. It is suitable for use in windy outdoor interview conditions, and greatly reduces microphone noise and clothes rustle, while also providing effective wind protection.

Designed for use with Lavalier microphones worn on the outside of clothing, the Lavalier Windjammer (or Furry) is the most heavy-duty of Rycote's subminiature Lavalier microphone products. It is suitable for use in windy outdoor interview conditions, and greatly reduces microphone noise and clothes rustle, while also providing effective wind protection.

Tie-pin, or Lavalier microphones as they are widely known, are ideal for discreet use in broadcast interview situations, their compact dimensions ensuring that they do not draw the eye on camera. Their convenient size means that they are even used by some radio broadcast engineers, despite their appearance not being an issue in that medium.

The Hi Wind Cover 1 is designed to fit the Modular Windshield WS 1 Kit to offer up to 35dB in wind noise reduction.

The Hi Wind Cover 10 is designed to fit the Modular Windshield WS 10 Kit to offer up to 35dB in wind noise reduction.

The Hi Wind Cover 2 is designed to fit the Modular Windshield WS 2 Kit to offer up to 35dB in wind noise reduction.

The Hi Wind Cover 295 is designed to fit the Modular Windshield WS 295 Kit to offer up to 35dB in wind noise reduction.

The Hi Wind Cover 3 is designed to fit the Modular Windshield WS 3 Kit to offer up to 35dB in wind noise reduction.

The Hi Wind Cover 4 is designed to fit the Modular 'Mono' Windshield 4 to offer up to 35dB in wind noise reduction.

The Hi Wind Cover 5 is designed to fit the Modular Windshield Kit to offer up to 35dB in wind noise reduction.

The Hi Wind Cover 6 is designed to fit the Modular Windshield WS 6 Kit to offer up to 35dB in wind noise reduction.

The Hi Wind Cover 7 is designed to fit the Modular Windshield WS 7 Kit to offer up to 35dB in wind noise reduction.

The Hi Wind Cover 8 is designed to fit the Modular Windshield WS 8 Kit to offer up to 35dB in wind noise reduction.

Add extra wind-noise protection to your Modular Windshield with this durable and discreet fleece cover.

Suitable for the Windshield WS 9 Kit.

Add extra wind-noise protection to your Modular Windshield with this durable and discreet fleece cover.

The Mini Windjammer for the Sennheiser HMD-46 provides excellent wind isolation for capturing audio in high-wind environments.

The Rycote 037302 Hot Shoe Adaptor with 3/8" Male Thread lets you attach any fitting with a 3/8" thread to a camera hot shoe.

I Rig Mic Cast Mini Windjammer

19-34mm átmérőjű mikrofonokkal való használatra alkalmas. Ideális front-heavy vagy Softie/Baby Ballgag szélvédővel használt mikrofonokhoz.

The Rycote INV-1 InVision Microphone Suspension addresses the demand for a professional, Rycote-quality shockmount in the studio, conference settings and speech capturing applications.

The Rycote INV-2 InVision Microphone Suspension addresses the demand for a professional, Rycote-quality shockmount in the studio, conference settings and speech capturing applications.

INV-3 is suitable for microphones including the AKG C430, Behringer C2, DPA 4021 and Sennheiser MKH8000 series with MZX8000.

The INV-4 is suitable for compact microphones such as the Schoeps CCM series and miniature shotgun mics such as the AKG C747. The 9.5mm Lyre clips feature a reducing sleeve which grips the connector and the cable, leaving the body of the microphone free to be completely covered by a foam.

The INV-5 is suitable for compact microphones such as the Schoeps CCM series when used without a large foam windshield. The single 62 (19/25) Lyre at the front holds a mic body diameter of 19-25mm and the rear single 62 (9.5) Lyre holds connectors of 8-11mm e.g. lemo.

Az INV-6 rövid, 19-25mm átmérőjű, kismembrános kondenzátor mikrofonokhoz alkalmazható, mint pl. a Sennheiser MKH 8020/40/50, MZX XLR moduljukkal használva. A mikrofontartó egy pár Single 72-es (19/25) Lírát is tartalmaz.

The INV-6 Heavy is a heavier grade version of the INV-6 which feature firmer Single 82 (19/25) Lyres which will support microphones used with lightweight windshields in 'run and gun' scenarios.

Mikrofontartó kismembrános kondenzátor mikrofonokhoz, mint pl. a Schoeps CMC-sorozat és "kispuska" mikrofonokhoz, mint a Sennheiser MKH416, beltéri, szivaccsal történő használatra.

INV-8 is suitable for microphones including the Neumann RSM190 and RSM191, Pearl MS8 and MSH10, and Sony ECM 999, ECM 979, and ECM 959.

INV-9 is suitable for microphones of up to 30mm in diameter, such as the Shure SM57 and SM58, and Neumann's KMS105.

INV-BH is suitable for microphones from 19 to 34mm in diameter, up to 500 grams in weight and 50 cm length maximum, with use of the 3/8" female Boom Adaptor.

The INV-Lite 19 Boom Shockmount from Rycote is a discreet, low-profile shockmount which isolates short shotgun microphones (19mm in diameter) from shock and handling noises, when they are used mounted on a boompole.

The INV-Lite 19 Boom Shockmount from Rycote is a discreet, low-profile shockmount which isolates short shotgun microphones (19mm in diameter) from shock and handling noises, when they are used mounted on a boompole.

Rycote have developed a little upgrade for the INV-Lite mount itself, whcih provides enhanced protection from the effects of air-flow over the shock mount, when fast booming.

InVision Stereo Pair Kit is suitable for shotgun microphones from 19-25 mm in diameter

The InVision Table Stand allows a microphone or recorder to be mounted on a flat surface, leaving both hands of the recordist free, and may be used in broadcast studios or for location recording where a desk or other flat surface is available.

The InVision Universal Pop Filter has been designed to optimise vocal performances, utilising a custom mesh capable of attenuating low-frequency vocal pops and thumps by up to 20dB, and causes no audibly detectable high-frequency loss, unlike many ordinary nylon pop screens.

Univerzális mikrofonkosár 18 és 55mm közötti átmérővel rendelkező, maximum 750g tömegű mikrofonokhoz.

Univerzális mikrofonkosár és pop filter 55 és 68mm közötti átmérővel rendelkező, 250g vagy kisebb tömegű mikrofonokhoz (függőleges elhelyezés esetén akár 450g-os mikrofonokhoz is alkalmas). A csomag 1 univerzális pop filter-t és 1 USM VB-L-t tartalmaz.

Univerzális mikrofonkosár 18mm és 55mm közötti átmérőjű, 400g vagy kisebb tömegű mikrofonokhoz (függőleges elhelyezés esetén akár 750g-os mikrofonokhoz is alkalmas).

Az InVision USM-L Studio Kit egy teljes felfüggesztő- és pop filter rendszer, amely az univerzális mikrofontartót (USM-L) kombinálja az új univerzális pop filter-rel, hogy egy olyan stúdiómikrofon felfüggesztő- és pop filter rendszert alkosson, ami gyakorlatilag bármilyen mikrofonhoz alkalmas. A csomag 1 univerzális pop filter-t és 1 USM-L-t tartalmaz.

Univerzális mikrofonkosár 55mm és 68mm közötti átmérőjű, akár 500g tömegű mikrofonokhoz (függőleges elhelyezés esetén akár 900g tömegű mikrofonhoz is alkalmas).

Univerzális mikrofonkosár és pop filter 55 és 68 mm közötti átmérővel rendelkező, 900g vagy kisebb tömegű mikrofonokhoz (függőleges elhelyezés esetén). A csomag 1 univerzális pop filter-t és 1 USM-VB-t tartalmaz.