The Ambient Recording 90° BNC Male to TA3F Timecode-Input Cable is used to feed time code into the SD 552 Sound Devices 552 Field Mixer.

ONLY ONE UNIT LEFT ON STOCK - Interface for connecting external keyboards to Sound Devices 7-Series audio recorders. Also includes programmable toggle switch for remote roll functions, status LED’s, and hard wire contact closures for custom wiring. Connects via C. Link port on the recorders.

Linear fader controller for the 688, 664 and 633. Powered by 6-Series USB connection for 688. 633 and 664 require external 5v power via rear USB port.*Not all features available on 664 & 633.

Same as CL-12 Classic with the addition of tweleve Penny & Giles high performance linear faders for extra smooth movement. Includes handcrafted Curly Blonde Maple wood side panels & aluminum panels.

Remote 30 mm linear fader for the 788T Digital Recorder. Mounts directly to most boom poles. Equipped with four programmable logic switches. Connects to the 788T through C-Link.

Input Controller for 664 & 688 . Adds dedicated front panel controls for inputs 7-12. Also offers LED output meters and additional recording controls.

External controller for 788T and 788T-SSD recorders. Designed for over the shoulder or cart applications. Provides control of pre- or post-fader gain, input routing, high-pass filter, input limiters, polarity reversal, input solo, and slate mic. Connects and powered from 788T from USB.

Linear fader controller for the 788T Digital Recorder. Includes 100 mm linear faders, rotary trim control, adjustable single-band parametric eq, pan control, and solo per input. Rotary level controls for L, R, Aux 1, and Aux 2 tracks and outputs. Also offers two PL comm return inputs. Powered by 788T USB connection.

The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox 12 is suitable for an ORTF stereo pair of Schoeps CCM in an ORTF Windshield kit (AE).

Production case with high-quality strap for use with 302, 702, 702T, 722, and 744T recorders and MixPre-D; NP-type battery compartment and accessory pouch for wireless. Made by CamRade for Sound Devices.

The 13.1' HBN-SQN3 Camera Loom Cable from Ambient Recording features 5-Pin to XLR-3/M with 3.5mm TRS connectors.

The 13.1' HBN10-10 Hirose 10-Pin Male to Hirose 10-Pin Female Breakaway Cable from Ambient Recording is used with Sound Devices 442 / 442N, 552, SQN4 (old designs), Cooper CS104, and TW Electronic LP44 / LP4 32 Mixers.

The HBN10-7 Straight Breakaway Cable with 2 x 2 + 2 Leads from Ambient Recording is equipped with Hirose 10-pin male to 7-pin XLR male connectors and is suitable for devices such as the Sound Devices 442 / 442N, 552, SQN4 (old designs), Cooper CS104 and the TW Electronic LP44 / LP4 32.

The 13.1' HBN10Y10-35 Hirose 10-Pin Male to Hirose 10-Pin Male Breakaway Cable from Ambient Recording comes with a Y cable and has a Hirose 10-pin female connector on one end and dual 3-pin XLR male connectors on the other end with a signal return via a TRS mini plug on the coiled cord.

The 13.1' HBN10Y10-5 Hirose 10-Pin Male to 7-Pin XLR Male Breakaway Cable from Ambient Recording comes with a Y cable and has a 7-pin XLR female connector on one end and dual 3-pin XLR male connectors on the other end with a signal return via a 5-pin XLR female connector.

The HBN12T-10 from Ambient Recording is a straight mixer/camera loom that is equipped with Tajimi 12-pin to Hirose 10F connectors.

The HBN12T-7 from Ambient Recording is a straight mixer/camera loom that is equipped with Tajimi 12-pin to XLR-7M connectors.

The Ambient Recording HBS-ALEXA Coiled Mixer Cable features two 3-pin XLR female and a 3.5mm TRS plug on one end and a 5-pin XLR male connector on the other.

The 4.5 to 16.4' HBS-SQN3Y7-35M Coiled Breakaway Cable for SQN3 from Ambient Recording comes with a Tuchel 5-pin male to 3-pin XLR male connector and return via TRS mini plug on coiled cord for SQN3.

The 4.6 to 16.4’ HBS10Y10-35 Hirose 10-Pin Male to Hirose 10-Pin Female Coiled Breakaway Cable from Ambient Recording comes with a Y cable and is used with Sound Devices 442 / 442N, 552, SQN4 (old designs), Cooper CS104, and TW Electronic LP44 / LP4 32 Mixers.