Elegant stand for extension tubes up to 700 mm.

This table microphone consists of two CCM 4 com­pact microphones (cardioids) rigidly attached to one another and facing in the same direction. They can be tilted forward or backward together.

Schoeps TC 2 Double miniature table stand for KC/CCM

These elegant table stands, with vibration-isolating base, can be placed unobtrusively. The vertical rod is removable, allowing the microphone to be mounted on the base close to the mounting surface.

This convenient elastic suspension device accepts any microphone or accessory (such as a gooseneck) with a 20 mm diameter. A clamping arrangement holds the item in place.

This elegant microphone desk stand is easily adjusted in height and angle, thus offering an esthetically pleasing alternative to goosenecks, which are often twisted into awkward shapes.

The required K 5 LU adapter cable (Lemo to XLR-3M) is included with the CCM _L.

Schoeps TSR 200 L Table stand with gooseneck element, for CCM, Lemo

With this bracket and two corresponding microphones, nearly any of the familiar stereo techniques (X/Y, M/S, ORTF, "Blumlein" crossed figure-8s, small A/B) can easily be set up.

The base of the USM-V4 has a 3/8" internal thread. A threaded adapter is supplied for 5/8" mounting.

The VA 1 is designed to clamp onto the body of a violin. A leather covering on all points of contact prevents damage to the instrument's surface finish.

The VA 2 is designed to clamp onto the body of a violin. A leather covering on all points of contact prevents damage to the instrument's surface finish.

The VA 3 is designed to clamp onto the body of a violin. A leather covering on all points of contact prevents damage to the instrument's surface finish.

The VA 4 is designed to clamp onto the body of a violin. A leather covering on all points of contact prevents damage to the instrument's surface finish.

This instrument adapter is attached to the bridge rather than the body of the instrument.

This windscreen is an accessory part for the CMIT 5/MiniCMIT shotguns microphone.

This windscreen is an accessory part for the CMIT 5/MiniCMIT shotguns microphone.

This windscreen is an accessory part for the CMIT 5/MiniCMIT shotguns microphone.

This windscreen is an accessory part for the SuperCMIT 2 U shotgun microphone.

This windscreen is an accessory part for the SuperCMIT 2 U shotgun microphone.

Basket windscreen with nylon fabric, made of two separable halves. It is rain-resistant and less unusual-looking than a fur-like windscreen.

Comprises a basket (W 20 R) and a fur-like overcoat (R1). It is ca. 13 dB more effective than the W 20, with no greater impairment of the sound quality.

The foam encloses an air chamber around the capsule, similar to a basket windscreen. It is highly effective, yet it has only a slight influence on the sound.

Acoustic foam windscreen, especially for use with omnidirectional microphones in wind.

The WB is su­i­ta­ble for CMC or CMD 2 U mi­cro­pho­nes with UMS 20, as well as KC Active Cables with MK capsules or CCM compact mi­cro­pho­nes.

Schoeps WKC 5 Active cable for Colette, angled version, 5m

This winds­creen has a gray po­rous vel­vet-li­ke sur­fa­ce tre­at­ment. It is de­si­gned so that con­ven­tio­nal M/S set­ups (AMS 22, UMS 20) as well as most mi­ni­a­ture mi­cro­pho­ne ar­ran­gements for M/S (RCY, SGMSC, HSGMSC) and also the X/Y microphone CMXY can be pro­tec­ted from mild wind.

The “ORTF Surround” recording method is a new system for the pickup of surround ambience.

The “ORTF Surround” recording method is a new system for the pickup of surround ambience.

This windscreen is designed exclusively for the CMIT 5 shotgun microphones. It consists of an outer "basket (Rycote-Size "Kit 3")," an elastic suspension and a "Connbox" with a very thin, pliable cable so that the suspension will be fully effective in isolating the microphone from solid-borne noise.

”Double M/S” is an improved version of the well-known M/S stereo recording technique. In addition to a front-facing ”mid” microphone (here this is a shotgun microphone) and a figure-8 ”side” microphone, a rear-facing directional microphone is set up.

”Double M/S” is an improved version of the well-known M/S stereo recording technique. In addition to a front-facing cardioid or supercardioid ”mid” microphone and a figure-8 ”side” microphone, a rear-facing directional microphone is set up.

The WSR MS consists of an elastic suspension (AMS_) and a basket-type windscreen with Windjammer. It is intended for one or two small microphones. It allows mono as well as M/S stereo recordings.

The WSR MS CMIT LU can be equipped with a CMIT 5 as mid channel and a CCM 8 Lg as side channel for M/S stereo recordings.

The WSR MS consists of an elastic suspension (AMS_) and a basket-type windscreen with Windjammer. It is intended for one or two small microphones. It allows mono as well as M/S stereo recordings.

The WSR ORTF LU consists of the STC 4 mounting adapter for ORTF (for two CCM 4 L cardioids), an elastic suspension, a Y-cable with Connbox and a basket-type windscreen including Windjammer.

This windscreen is designed for the Super-CMIT 2 U digital shotgun microphones. It consists of an outer "basket, an elastic suspension and a "Connbox" with a very thin, pliable cable.

The Z 10 allows microphones or accessory parts to be mounted onto the edge of a table or the like.