Zaxcom purple ERX rubber knob.

Zaxcom red ERX rubber knob.

ERXKBS - ERX Rubber Knob set of 8 colors: White, Brown, Red, Orange, Yellow, Green, Blue and Purple.

Zaxcom white ERX rubber knob.

Zaxcom yellow ERX rubber knob.

External 12 volt power supply with Hirose connector.

The FDP2 is an RF filter that is used in receiver and transmitter applications. The filter is factory tuned to a frequency between 512MHz and 692MHz.

The IFB200 can be used as either a transmitter or receiver. As a transmitter, it sends IFB audio, timecode and remote control commands to our TRX digital recording wireless transmitters and ERX receivers. It can also be used to monitor audio from a QRX or any other ZaxNet transmitter.

DESIGN
The IFB300 is a ZaxNet™ transmitter that sends high-quality, fully encrypted IFB audio, timecode, and remote control commands to Zaxcom Digital Recording Wireless transmitters and ERX receivers. The signals are carried on a single RF channel ocer 2.4 GHz which can be used license-free in almost any country.
Weighing 7.3 oz, it’s constructed from an impact-resistant metal casing that’s cool to the touch. A bright OLED display provides easy menu navigation.

Replacement bendable IFB Antenna (Short)

Built-in receiver allows for audio to be received from the
IFB100/200.

Switchcraft 761k.

Long shaft receiver power supply.

The Zax-Maxx has 6 analog inputs, 4 with mic pre amps featuring NeverClip™ and 2 AES digital inputs that can be used with AES42 microphones. Includes 1 x 6AA battery holder and 1 x fader decal strip.

The Maxx 2-Channel Transmitter & Timecode Option enables the Maxx to transmit two channels of audio and SMTPE timecode to any Zaxcom ENG receiver. (The QRX100 requires the QIFB option installed for time code reception.) Includes 1 x SMA antenna.

Maxx fully loaded is the basic model four input/ 2-channel recorder loaded with the following options: four channels of AES/AES42 in with sample rate conversion; two channel transmitter with time code option (must specify transmitter block); six channel recording optionMaxx with built-in transmitter, must specify transmitter frequency.

The Micplexer 2 is an antenna distribution amplifier for diversity wireless microphone systems. The MicPlexer 2 connects to 2 antennas and distributes the signals to up to 3 wireless microphone receivers.

8 x 20" SMA to SMA RF cables

The light-weight Mix-16 is an intuitive control surface solution for Deva 24. Combined, the system delivers 24 track recording that can be controlled by 16 motorized faders in five banks found on the Mix-16. Any combination of input channels on Deva 24 can be assigned to any of the five banks using any combination of analog or digital inputs.

The Mix-8 is a control surface for the embedded digital mixer of the Nomad, Fusion or Deva. Mixing is performed in the digital domain via a floating DSP ensuring the highest quality so there’s no distortion or channel to channel differences. Includes power supply and serial cable for connecting to Nomad.

Spare 5" MicPlexer Power cable with 761k power connectors.

MRX214 is a hot swappable module receiver designed for use in our Nova mixer / recorder, RX-12 and RX-12R.

MRX414 is a hot swappable module receiver designed for use in our Nova mixer / recorder, RX-4, RX-8, RX-12, and RX-12R.

For the TRXLA and TRXLT.

For the TRXLA and TRXLT.

For the TRXLA and TRXLT.

For the TRXLA and TRXLT.

For the TRXLA and TRXLT.

For the TRXLA and TRXLT.

For the TRXLA and TRXLT.

For the TRXLA and TRXLT. Colors are White, Brown, Red, Orange, Yellow, Green, Blue and Purple.

For the TRXLA and TRXLT.

For the TRXLA and TRXLT.

Requires Nomad 12 Serial # to generate unlock code
Does not include cables or tablet, only compatible with Nomad 12

Nomad is a complete location sound recording system designed specifically for soundbag use, Nomad provides all the functionality necessary to mix and record in a power efficient space-saving package. Includes 1 x 6AA battery holder and 1 x fader decal strip and 1 x Bendable IFB antenna.
All cables and 12V power supply are optional.

A Nomad egy teljes hordozható hangrögzítő rendszer, amelyet kifejezetten táskás használatra terveztek. A Nomad biztosít minden funkciót, ami szükséges ahhoz, hogy egy energia- és helytakarékos összeállítással keverjen és rögzítsen. A csomag tartalmaz 1 x 6AA battery holder-t, 1 x fader decal strip-et és 1 x összehajtható IFB antennát. Minden kábel, és a 12V tápellátás opcionális.

Nomad’s FP8 is a small lightweight expansion panel control surface that attaches directly to the Nomad mixer / recorder. Includes set of mounting screws.

Nomad is a complete location sound recording system designed specifically for soundbag use, Nomad provides all the functionality necessary to mix and record in a power efficient space-saving package.

Programmed USB cable (3').

Serial cable to connect the Mix-8 to Nomad.

3.5mm to 3.5mm tape output to computer or tablet (5').

3.5mm to TA5 Nomad return input (5').

Nomad Touch expands the functionality and features of your Nomad 12 with a touch screen interface designed for use in the sound bag. New ZaxHub integration allows you to use your Nomad Touch along with your FP-8 or Mix-8 and RX-12. Requires Nomad 12 Serial # to generate unlock code. Includes 1 x Serial data cable and 1 x Tablet to Nomad audio cable. Does not include Windwos tablet, only compatible with Nomad 12.

Nova - egy komlpett hangfelvevő megoldás, amely magába foglalja a keverőt, felvevőt, ZaxNet™ távvezérlést és a vezetéknélküli vevőket egyetlen kompakt és könnyű eszközbe. A népszerű Nomad és Deva 24 tulajdonságait kombinálva két beépített vezetéknélkűli vevővel, a Nova egy új sztenderdet állít fel a játékfilm-, TV közvetítés-, élő előadások- és a nagyfelbontású hangeffektek felvétele terén.

-NP-50 Li-Ion, 3.7V, 1000mAh, rechargeable battery
-for use with ZMT transmitter and ZFR400 recorder

The Oasis is a full featured mixing panel with 8 motorized, touch sensitive faders on 3 active banks for up to 40 assignable fader channels. In addition you’ve got hardware trim controls, transport control, dedicated PFL keys, routing control and more. Includes 1 x Nomad to Oasis USB cable, 1 x Oasis to computer USB cable and 1 x Nomad to computer audio cable. Does not include computer or tablet, only compatible with Nomad 12.

Used to monitor audio being recorded / played back or
received from the IFB100/200. It has standard 3.5mm jack.

Built-in IFB transmitter / receiver for audio, timecode and remote
control commands. Adds a mono headphone output jack to the QRX. Includes bendable IFB antenna.

The QRX200 is a 200 MHz wide ENG receiver. A tunable tracking front end filter is featured in the QRX200 so you can receive any frequency in any block from 20 through 27 or 512 – 698 MHz while still filtering out unwanted RF.

The QRX212 is a dual channel wideband receiver module for use with the Zaxcom RX-12 Digital Wireless Receiver. The modules can be easily added or swapped as necessary.

QRX235 receives up to 4 channels of 100% digital audio from up to 2 transmitters, any combination of mono and stereo transmitters is accepted. The audio output can be either analog or AES. It also features our patented side mounted LED’s, these provide visual confirmation of audio and RF reception.

The QRX300 is a special order receiver dedicated to receive a single channel of ZHD48 modulation. The receiver has very narrow filters that allow for a 50 KHz wide signal to be received with a channel spacing as close as 100 KHz.

Slot-in receiver for RX-12. Dedicated ZHD receiver, receives from ONLY ONE ZHD transmitter, spacing @ 100 KHz.

The QRX335 is an ENG receiver designed to pair with a single Zaxcom High Density transmitter in a matching block for channel-spacing as close as 100 KHz.

RX-12 is a one stop receiver solution for your bag or cart. It contains a 35 MHz tracking front end filter to eliminate interference from unwanted stray RF, an RF amplifier and antenna and power distribution for up to six QRX212 dual receiver modules for the reception of twelve separate TRX transmitters.

The RX-12R is a completely reimagined rack mountable receiver ideal for sound challenges in studio and network applications. Its ergonomic design takes up only one-and-a-half rack spaces in height.

The RX-4 is an interface to convert Zaxcom’s MRX214 and MRX414 receiver modules into stand-alone receivers.