|
10 020 Ft
(7 890 Ft nettó)
|
Back-to-Back Clips
The Rycote Back-to-Back Clips for Microphones (for Stereo Suspension) can hold 19-25mm diameter microphones and slab-sided MKH microphones in M/S stereo. Soft grip surface on the internal edges prevent microphones from slipping or rotating inside the clips. |
|
10 020 Ft
(7 890 Ft nettó) |
|
|
18 682 Ft
(14 710 Ft nettó)
|
Boom Adaptor w/Lever & XLR Holder MkIII
The Boom Adapter with Ratchet Lever from Rycote enables the Modular suspension to be mounted onto boompoles and fishpoles. It features a brass 3/8"-16 female thread for complete integration with the studs located on the poles. |
|
18 682 Ft
(14 710 Ft nettó) |
|
|
10 935 Ft
(8 610 Ft nettó)
|
Boom Pole Adaptor
The Rycote Boom Adapter will enable the Modular Suspension to be mounted onto boom poles and fish poles. The Boom Adapter features a brass 3/8" female thread for complete integration with the studs located on boom poles. |
|
10 935 Ft
(8 610 Ft nettó) |
|
|
4 559 Ft
(3 590 Ft nettó)
|
Brass 3/8" M to 5/8" F screw adaptor
The Rycote 047302 is a brass mic stand adapter. This adapter attaches a mic or other equipment with a 3/8" threaded connection to a 5/8" mic stand threaded stud. |
|
4 559 Ft
(3 590 Ft nettó) |
|
|
6 833 Ft
(5 380 Ft nettó)
|
Brass Shoe Adaptor with 1/4-inch male thread
This Rycote Hot Shoe to 1/4"-20 Adapter is used to mount accessories with a 1/4"-20 female thread onto a camera's shoe mount. |
|
6 833 Ft
(5 380 Ft nettó) |
|
|
5 474 Ft
(4 310 Ft nettó)
|
CABLE CLIPS PACK OF 10
|
|
5 474 Ft
(4 310 Ft nettó) |
|
|
7 747 Ft
(6 100 Ft nettó)
|
Camera Mic Clamp / Hot Shoe Adaptor
This Rycote CC-Hotshoe Camera Clamp Adapter allows standard shoe-mountable items to be used in a 21/25mm camera clamp. The adapter ships with a removable sleeve that acts as a shim for providing a snug fit into 25mm clamps (Sony and Canon). |
|
7 747 Ft
(6 100 Ft nettó) |
|
|
29 997 Ft
(23 620 Ft nettó)
|
Connbox CB1 (XLR-3F)
The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox CB1 hardwired (XLR-3F tail not detachable) and is suitable for mono microphones with a 3-pin XLR connector. |
|
29 997 Ft
(23 620 Ft nettó) |
|
|
44 260 Ft
(34 850 Ft nettó)
|
Connbox CB10 (LEMO)
The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox CB10 (LEMO) is suitable for single Schoeps CCM_L in a WS 9 Kit. The Lemo tail is hardwired to the Connbox. |
|
44 260 Ft
(34 850 Ft nettó) |
|
|
125 768 Ft
(99 030 Ft nettó)
|
Connbox CB11 (2MZL Detachable)
The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox CB11 (2MZL Detachable) is suitable for a pair of Sennheiser MKH 8040s or 8050s in a WS AC MS Kit (XY/MS) or an ORTF Windshield Kit. The MZL tails are detachable from the Connbox. |
|
125 768 Ft
(99 030 Ft nettó) |
|
|
Hívjon az árért
|
Connbox CB12 (2LEMO-Detachable)
The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox 12 is suitable for an ORTF stereo pair of Schoeps CCM in an ORTF Windshield kit (AE). |
|
Hívjon az árért |
|
|
46 863 Ft
(36 900 Ft nettó)
|
Connbox CB2 (XLR-3F Detachable)
The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox CB2 is suitable for long shotgun microphones with 3-pin XLR. The XLR-3F tail is detachable from the Connbox. |
|
46 863 Ft
(36 900 Ft nettó) |
|
|
59 982 Ft
(47 230 Ft nettó)
|
Connbox CB3 (2XLR-3F)
The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox 3 is suitable for most M/S stereo pairs with two 3-pin XLRs. |
|
59 982 Ft
(47 230 Ft nettó) |
|
|
58 331 Ft
(45 930 Ft nettó)
|
Connbox CB4 (XLR-5F)
The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox CB4 is suitable for single shank stereo microphones with 5-pin XLR. |
|
58 331 Ft
(45 930 Ft nettó) |
|
|
59 881 Ft
(47 150 Ft nettó)
|
Connbox CB5 (LEMO Detachable)
The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox 5 is suitable for single Schoeps CCM in a WS 9 Kit with Lemo connector. The Lemo tail is detachable from the Connbox. |
|
59 881 Ft
(47 150 Ft nettó) |
|
|
103 899 Ft
(81 810 Ft nettó)
|
Connbox CB9 (MZL)
The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox CB9 (MZL) is suitable for single Sennheiser MKH 8020, 8040 or 8050 in a WS 9 Kit. |
|
103 899 Ft
(81 810 Ft nettó) |
|
|
61 519 Ft
(48 440 Ft nettó)
|
CYCL HANDLE/PCS
|
|
61 519 Ft
(48 440 Ft nettó) |
|
|
4 559 Ft
(3 590 Ft nettó)
|
CYCL XLR HOLDER
|
|
4 559 Ft
(3 590 Ft nettó) |
|
|
53 772 Ft
(42 340 Ft nettó)
|
Duck Raincover 1
Protect your Modular Windshield 1 Kit from the bad weather with the Rycote Duck Rain Cover! |
|
53 772 Ft
(42 340 Ft nettó) |
|
|
53 772 Ft
(42 340 Ft nettó)
|
Duck Raincover 2
Protect your Windshield 2 Kit from the bad weather with the Rycote Duck Rain Cover 2! |
|
53 772 Ft
(42 340 Ft nettó) |
|
