CMXY 4V Ug: XLR-5M output plug; The adapter cable AK SU/2U (XLR-5F to 2 × XLR-3M) is included.

The CUT 1 prevents the effect of infrasonic disturbances from being passed on to any succeeding device and offsets proximity effect and/or to improve speech intelligibility in reverberant rooms by means of an additional 6 dB/oct rolloff.

The CUT 2 prevents the effect of infrasonic disturbances from being passed on to any succeeding device and offsets proximity effect and/or to improve speech intelligibility in reverberant rooms by means of an additional 6 dB/oct rolloff.

This double M/S set includes the microphones, windscreen and cables needed for double-M/S recording. It is designed for digital recording of the three unprocessed microphone signals, with subsequent post-processing to be performed through the use of our Double M/S plug-in.

The GA 1 clamps onto the sound hole of a guitar and is tightened by turning a coin in the outward-facing slot. With this mounting device the microphone or capsule is positioned within the instrument, where the maximum sound level can be obtained without risk of feedback.

With this clamp a CMC microphone amplifier can be mounted onto an STR vertical support rod or any other rod 12 mm in diameter.

The 16.4' (5.0m) K 5 ISK Adapter Cable for CMBI Battery-Powered Microphone Amplifier from Schoeps carries the mono signal on the tip as well as on the ring. This enables the signal to be connected to both channels of a stereo jack socket when a single microphone is in use.

Schoeps K EMC - extra charge per m HQ Microphone Cable, Mono

This single-channel microphone cable features a special RF-resistant Neutrik connectors at both ends. This connector uses a circular array of miniature capacitors to connect pin 1 to the connector housings, thus offering substantial protection from radio-frequency interference while also preventing ground loops.

This single-channel microphone cable features a special RF-resistant Neutrik connectors at both ends. This connector uses a circular array of miniature capacitors to connect pin 1 to the connector housings, thus offering substantial protection from radio-frequency interference while also preventing ground loops.

By using the Active Stereo Cable KCY, a complete stereo recording setup can be arranged with only two small capsules and a small, elegant supporting device being visible.

By using the Active Stereo Cable KCY, a complete stereo recording setup can be arranged with only two small capsules and a small, elegant supporting device being visible.

For stereo recording, the 16" Y-Cable from Schoeps connects two CMBI Battery-Powered Microphone Amplifiers to a compact junction box by means of two pieces of a cable, each 9.8” (250mm) in length.

This cable allows two CCM-L compact microphones to be connected to a single two-channel output cable.

This cable allows two CCM-L compact microphones to be connected to a single two-channel output cable.

This cable allows two CCM-L compact microphones to be connected to a single two-channel output cable.

This cable allows two CCM-L compact microphones to be connected to a single two-channel output cable.

The KMSC is used for adapting a microphone of any directionality (including shotgun microphones) to M/S stereo, by the use of a CCM 8 (figure-8).

This high-quality extension cable with miniature Binder connectors can be used together with stereo arrangements that use KCY -/- I Y cables.

This high-quality extension cable with miniature Binder connectors can be used together with stereo arrangements that use KCY -/- I Y cables.